owens350z

any one know if someone is in the making of a black 350z door handle? or know if nissan makes one? my cars black n wanna black it out with black on black but the damn door handle hella stands out, any ideas? and help would be greatful thanks

HyperSprite

iTrader: (6)

Paint to look like paint, electro plating for a black chrome look?

I have seen at least two black Zs with black handles.

Chris

taurran

iTrader: (18)

Just paint them.

owens350z

i thought about that but thats hella money to have a shop paint em, unless i can paint em some how? ive never painted car parts before ive always gone to shops i dont have the materials to paint like a paint sprayer n etc

Mid117

iTrader: (11)

Tint them

z-u-later

iTrader: (43)

Does anyone know if Blue Batmobile makes vinyls for the door handles that will match the Zs colors?

steveiZdaman

iTrader: (2)

or wait for the carbon fiber ones!!!!!!!!

owens350z

thats true when do the cf ones come out?

jtabraham

iTrader: (46)

take the handles off, and spray them with some Krylon spray paint, wet sand, spray a couple coats of clear, wet sand and reinstall them.

You will have spent probably 10 bucks when it's all said and done.

owens350z

thats it? hmmm maybe ill try that

3FITTTY

iTrader: (3)

solidsnake on here has his painted black..

Crimso

Black annodize. At your local aluminum plater. Usually its a lot charge, so take all the aluminum parts you want black.

Rickdogg

iTrader: (234)

Your best bet is to have them professionally painted, but if you cannot afford it at the moment I would suggest just painting them with some flat black paint or something since it will not show as much imperfections since it is flat black

Forujames

I would like to paint mine as well-could some one give me a step by step procedure for getting them off and back on? I can see one bolt that is under a rubber plug-but it can't be that simple. Thanks. James

steveiZdaman

iTrader: (2)

they should be available soon for purchase....a ton of ppl are waiting on the pricing to be released...

heres the pic from the other thread with the asuka kit...

zstreet86

iTrader: (4)

or if you dont want to paint them you can cut some black vinyl....

jtabraham

iTrader: (46)

As deceptive as they look, the handles are actually a high strength polymer (read: plastic)...NOT aluminum or any other type of metal. The fire test will confirm this

sluggoZ

iTrader: (129)

The handle is plastic!

sluggoZ

iTrader: (129)

The handle is plastic! I didn't see the above post!

efx

iTrader: (4)

im thinking of powdercoating mine... heres a sample pic

HERE

does it look too ricey?