Harness Bar interest
06-19-2007, 09:05 AM
#221
Registered User
iTrader: (23)
Join Date: Sep 2006
Location: Costa Rica
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by THE TECH
It's more cause there's not really a good, safe way to mount a 5 or 6pt harness to the stock seat.
but I will probably keep the stockers and get 4 pointers (maybe 6 pointers and see if I can custom-install them somehow).I hope your harness bar is coming along well... I will wait for it before making any moves!
Thanks!
C.
06-19-2007, 09:50 AM
#222
Registered User
Join Date: Jun 2003
Location: New Bern, NC
Posts: 3,604
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CarlosCh
Hmmm... I see... I might be hard-headed but I will probably keep the stockers and get 4 pointers (maybe 6 pointers and see if I can custom-install them somehow).
I hope your harness bar is coming along well... I will wait for it before making any moves!
Thanks!
C.
but I will probably keep the stockers and get 4 pointers (maybe 6 pointers and see if I can custom-install them somehow).I hope your harness bar is coming along well... I will wait for it before making any moves!
Thanks!
C.
How many airbags does a 350Z have? For my money, ESPECIALLY for a n00b, but it applies to everyone... you WILL be safer in the stock belts, with the passive systems active, than you will with 4-point belts. This is exponentially true with a harness system without any type of Anti-submarining mechanism like Schroth's ASM cartridge.
No one NEEDS harnesses on track until they are at the advanced level and are ready to move up to stickier tires and/or to start competing.
You might do well with a harness for Autocross maybe, and if that's all your doing, then have-at-it. You might roll, but chances are you won't hit anything of any substantial substance.
Having said all that... if you insist on stock seats with harnesses, buy a 6-point system, and run the anti-sub straps from behind the seat, through the joint between the lower cushion and the seatback so you would sit on them, and they'd come up thru your legs. While this is still a compromise, it is the much lesser of many evils, and the only way some clubs will allow harnesses while using stock seats.
06-19-2007, 09:53 AM
#223
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Stack
Here's the problem with doing that: No protection against submarining and/or riding-up of the lap belt into your abdomen/stomach and causing serious injury.
How many airbags does a 350Z have? For my money, ESPECIALLY for a n00b, but it applies to everyone... you WILL be safer in the stock belts, with the passive systems active, than you will with 4-point belts. This is exponentially true with a harness system without any type of Anti-submarining mechanism like Schroth's ASM cartridge.
No one NEEDS harnesses on track until they are at the advanced level and are ready to move up to stickier tires and/or to start competing.
You might do well with a harness for Autocross maybe, and if that's all your doing, then have-at-it. You might roll, but chances are you won't hit anything of any substantial substance.
Having said all that... if you insist on stock seats with harnesses, buy a 6-point system, and run the anti-sub straps from behind the seat, through the joint between the lower cushion and the seatback so you would sit on them, and they'd come up thru your legs. While this is still a compromise, it is the much lesser of many evils, and the only way some clubs will allow harnesses while using stock seats.
How many airbags does a 350Z have? For my money, ESPECIALLY for a n00b, but it applies to everyone... you WILL be safer in the stock belts, with the passive systems active, than you will with 4-point belts. This is exponentially true with a harness system without any type of Anti-submarining mechanism like Schroth's ASM cartridge.
No one NEEDS harnesses on track until they are at the advanced level and are ready to move up to stickier tires and/or to start competing.
You might do well with a harness for Autocross maybe, and if that's all your doing, then have-at-it. You might roll, but chances are you won't hit anything of any substantial substance.
Having said all that... if you insist on stock seats with harnesses, buy a 6-point system, and run the anti-sub straps from behind the seat, through the joint between the lower cushion and the seatback so you would sit on them, and they'd come up thru your legs. While this is still a compromise, it is the much lesser of many evils, and the only way some clubs will allow harnesses while using stock seats.
06-19-2007, 01:21 PM
#224
Registered User
iTrader: (23)
Join Date: Sep 2006
Location: Costa Rica
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Stack
Here's the problem with doing that: No protection against submarining and/or riding-up of the lap belt into your abdomen/stomach and causing serious injury.
How many airbags does a 350Z have? For my money, ESPECIALLY for a n00b, but it applies to everyone... you WILL be safer in the stock belts, with the passive systems active, than you will with 4-point belts. This is exponentially true with a harness system without any type of Anti-submarining mechanism like Schroth's ASM cartridge.
No one NEEDS harnesses on track until they are at the advanced level and are ready to move up to stickier tires and/or to start competing.
You might do well with a harness for Autocross maybe, and if that's all your doing, then have-at-it. You might roll, but chances are you won't hit anything of any substantial substance.
Having said all that... if you insist on stock seats with harnesses, buy a 6-point system, and run the anti-sub straps from behind the seat, through the joint between the lower cushion and the seatback so you would sit on them, and they'd come up thru your legs. While this is still a compromise, it is the much lesser of many evils, and the only way some clubs will allow harnesses while using stock seats.
How many airbags does a 350Z have? For my money, ESPECIALLY for a n00b, but it applies to everyone... you WILL be safer in the stock belts, with the passive systems active, than you will with 4-point belts. This is exponentially true with a harness system without any type of Anti-submarining mechanism like Schroth's ASM cartridge.
No one NEEDS harnesses on track until they are at the advanced level and are ready to move up to stickier tires and/or to start competing.
You might do well with a harness for Autocross maybe, and if that's all your doing, then have-at-it. You might roll, but chances are you won't hit anything of any substantial substance.
Having said all that... if you insist on stock seats with harnesses, buy a 6-point system, and run the anti-sub straps from behind the seat, through the joint between the lower cushion and the seatback so you would sit on them, and they'd come up thru your legs. While this is still a compromise, it is the much lesser of many evils, and the only way some clubs will allow harnesses while using stock seats.
I will keep The Tech's and your advice in mind for whatever I decide to do in the coming weeks.
Best Regards,
Carlos Ch.
06-19-2007, 02:00 PM
#225
Registered User
iTrader: (12)
Join Date: May 2006
Location: Ft. Lauderdale, FL
Posts: 4,216
Likes: 0
Received 0 Likes
on
0 Posts
I have the sparco harness bar and I must say that it is nothing special, this would be a great deal if it went through. I had no other option when I got my bar installed and it was an *** raping to say the least...lol. Good luck guys.
06-25-2007, 11:06 AM
#226
Registered User
Thread Starter
iTrader: (154)
Join Date: Jun 2003
Location: Hills of Anaheim
Posts: 10,735
Likes: 0
Received 0 Likes
on
0 Posts
Just wanted to update. I've had a small design change that should make the production of the bar easier. This should mean that I can schedule production with my fabricator very soon. Time frame to completion will still be ~6 weeks from that date.
07-30-2007, 10:36 AM
#239
Registered User
iTrader: (3)
Join Date: May 2007
Location: South Florida
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
What type of steel will be used? (i.e 120-wall). What type of welding will be used upon assembly? (i.e. MIG welded)
(Im very intersted if high qaulity and ever available)
(Im very intersted if high qaulity and ever available)
Last edited by 350ZV3; 07-30-2007 at 10:50 AM.
07-30-2007, 10:59 AM
#240
Registered User
iTrader: (43)
Join Date: Jun 2006
Location: Lone Star State
Posts: 2,757
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CarlosCh
Hmmm... I see... I might be hard-headed but I will probably keep the stockers and get 4 pointers (maybe 6 pointers and see if I can custom-install them somehow).
but I will probably keep the stockers and get 4 pointers (maybe 6 pointers and see if I can custom-install them somehow).