eManage Ultimate--Crank Signal OK'ed and Installation Pointers
08-05-2005, 03:26 AM
#21
Registered User
iTrader: (2)
Join Date: Sep 2002
Location: Iowa
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
The only thing missing from the list of capabilities that I would still want is the ability to advance/retard the cams. The Motec can do this and so can an ECU reflash. The problem is, no one really knows just yet how this will effect overall performance or how much advance/retard and at what rpm but some people that did work on some M3s had major NA HP gains with just ECU cam adjustments. I think this could be the NA answer for our cars as well. BTW the HP gains on the M3s was about 60-70 rwhp with an exhaust and the ECU cam adjustments. If our NA cars could yield even half that type of gain we could be looking at 310-320 rwhp on highly modified NA Zs, maybe more.
08-05-2005, 06:10 AM
#22
Originally Posted by GurgenPB
If it still cannot scale injectors by a method other tha MAF scaling, the ideal would be to have a correct 16x16 injector table flashed in the stock ECU, and just mess with the rest inside EU. Can't wait...
That's one of the key features of the EU, Gurgen.
It scales the injectors via injector pulse width reduction, and the MAF remains unchanged. woohoo!!And be careful if you goto Tony's, as he might might you dig a ditch, or modify his car lift...or some other domestic or mechanical chore.
08-05-2005, 07:54 AM
#24
Originally Posted by cjb80
How long have you had your car running with the EU? Have you noticed any glitches, misfires, etc?
Thanks
Chris
Thanks
Chris
About 3 weeks now...I think.
No glitches that I can see...even the software seems pretty stable.
08-05-2005, 11:00 AM
#26
Originally Posted by Sharif@Forged
That's one of the key features of the EU, Gurgen. It scales the injectors via injector pulse width reduction, and the MAF remains unchanged. woohoo!!
And be careful if you goto Tony's, as he might might you dig a ditch, or modify his car lift...or some other domestic or mechanical chore.
It scales the injectors via injector pulse width reduction, and the MAF remains unchanged. woohoo!!And be careful if you goto Tony's, as he might might you dig a ditch, or modify his car lift...or some other domestic or mechanical chore.
Originally Posted by qbs
Hey Gurgen this is george with the white Z ( z pimpn ) I ordered one of these and it should be at tonys house by tommarow, we probally wont start doing the TT install for another week or two but your more than welcome to come check it out, that is as long as tony lets you come over!
08-05-2005, 11:57 AM
#28
Registered User
Join Date: Jul 2005
Location: vancouver, wa
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Alternate place for firm ware.
http://www.mohdparts.com/emanage/#Al...20&%20Firmware
Mohdparts keeps up to date on the Greddy stuff... You can get the firmwares and software from them.
Mohdparts keeps up to date on the Greddy stuff... You can get the firmwares and software from them.
08-05-2005, 12:03 PM
#29
Originally Posted by spdkils
http://www.mohdparts.com/emanage/#Al...20&%20Firmware
Mohdparts keeps up to date on the Greddy stuff... You can get the firmwares and software from them.
Mohdparts keeps up to date on the Greddy stuff... You can get the firmwares and software from them.
Good stuff. I do have the latest 1.06 if anyone else needs it. And for those that already have it, please feel free to share it with others.
Just dont get too excited over Mohd's prices, as you have to add 3% to the price, plus shipping...so at times...his prices will look a lot lower than others.
08-05-2005, 12:05 PM
#30
Registered User
Join Date: Jul 2005
Location: vancouver, wa
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Here is your plug... BUY FROM FORGED INTERNALS!!! Everybody's doin' it!
But the 1.06 can be downloaded from MOHD.
But the 1.06 can be downloaded from MOHD.
Last edited by spdkils; 08-05-2005 at 12:30 PM.
08-05-2005, 12:07 PM
#31
Originally Posted by spdkils
Here is your plug... BY FROM FORGED INTERNALS!!! Everybody's doin' it!
But the 1.06 can be downloaded from MOHD.
But the 1.06 can be downloaded from MOHD.
Oh crap...I guess he just added it to the website....that guy is good! LOL.
Hey, the FEDEX guy tried to deliver your APS TT kit today. I told him you changed your mind, and to send it back to me.
kidding....did he contact you? I gave him your number.
08-05-2005, 12:16 PM
#32
Registered User
Join Date: Jul 2005
Location: vancouver, wa
Posts: 239
Likes: 0
Received 0 Likes
on
0 Posts
Yeah... I broke a few laws driving home to take delivery...
But the kit is sitting next to my bed for some dirty fantasies tonight... err I mean... I have another thread started....
https://my350z.com/forum/forced-induction/135656-to-f-i-or-not-to-f-i-that-is-the-question.html
I'm thinking of installing the base TT kit, while I wait for $$$ to finish the rest of it. Now I just need to decide if I'm going to pull the engine, or install it with the engine in...
The kicker is... I have EVERYTHING except AAM fuel system, injectors, boost controler, and 02 sensors. I have the $$ for those parts... HOWEVER!!!! I don't have enough for all that, and to have a professional install...
So I'm going to have to make a tuff call here... Install as is... And then get the Forged parts in when I have the $$$ or just wait...
I'm leaning to install the turbo kit myself, and then once I've got the cash, get the forged parts installed sometime this winter.
I helped my brother install his turbo on his 240sx so I'm not a total virgin, but it is still intemidating...
spdkils
But the kit is sitting next to my bed for some dirty fantasies tonight... err I mean... I have another thread started....
https://my350z.com/forum/forced-induction/135656-to-f-i-or-not-to-f-i-that-is-the-question.html
I'm thinking of installing the base TT kit, while I wait for $$$ to finish the rest of it. Now I just need to decide if I'm going to pull the engine, or install it with the engine in...
The kicker is... I have EVERYTHING except AAM fuel system, injectors, boost controler, and 02 sensors. I have the $$ for those parts... HOWEVER!!!! I don't have enough for all that, and to have a professional install...
So I'm going to have to make a tuff call here... Install as is... And then get the Forged parts in when I have the $$$ or just wait...I'm leaning to install the turbo kit myself, and then once I've got the cash, get the forged parts installed sometime this winter.
I helped my brother install his turbo on his 240sx so I'm not a total virgin, but it is still intemidating...
spdkils
08-06-2005, 01:46 PM
#33
Registered User
iTrader: (9)
Join Date: Dec 2004
Location: Great Falls, Montana
Posts: 986
Likes: 0
Received 0 Likes
on
0 Posts
Sharif,
Have you received any info on the ECU pinouts for the vehicle speed?
I also deciphered the manual and found these additional pins.
I remember you asking about intake temp.
ECU PIN #'s
34 Intake Temp
73 Water Temp
Is there a difference between pin 106 throttle position and pin 50 throttle position?
Have you received any info on the ECU pinouts for the vehicle speed?
I also deciphered the manual and found these additional pins.
I remember you asking about intake temp.
ECU PIN #'s
34 Intake Temp
73 Water Temp
Is there a difference between pin 106 throttle position and pin 50 throttle position?
08-06-2005, 01:51 PM
#34
Originally Posted by Badmonkey_1
Sharif,
Have you received any info on the ECU pinouts for the vehicle speed?
I also deciphered the manual and found these additional pins.
I remember you asking about intake temp.
ECU PIN #'s
34 Intake Temp
73 Water Temp
Is there a difference between pin 106 throttle position and pin 50 throttle position?
Have you received any info on the ECU pinouts for the vehicle speed?
I also deciphered the manual and found these additional pins.
I remember you asking about intake temp.
ECU PIN #'s
34 Intake Temp
73 Water Temp
Is there a difference between pin 106 throttle position and pin 50 throttle position?
Great work...thanks for finding the pins for intake temp and water temp.
In regards to TPS, only use 50. 106 is a different scale. It's kinda like a push/pull setup. You want the signal that is from 0V to whatever...not the other way around. So use 50 for TPS for this wiring applications.
Thanks again!!
08-06-2005, 01:54 PM
#35
Registered User
iTrader: (9)
Join Date: Dec 2004
Location: Great Falls, Montana
Posts: 986
Likes: 0
Received 0 Likes
on
0 Posts
Another note to all who had the blue unit hooked up. If you only bought the supplemental harness, you are going to have to re-wire your injector harness. The injector signals are now cut and routed through the EU. The previous setup was just tapping into the wires. I just left the wires that were already hooked up and used them as my injector output wires. Then I cut the injector wires on the Autosport run them into the EU then from the EU out to the original wires that were already hooked up. I was then left with 6 cut wires on the Autosport that are not hooked up, just capped.
I hope this makes sense, if anyone has any questions, just let me know.
Back to the wires...
I hope this makes sense, if anyone has any questions, just let me know.
Back to the wires...
08-06-2005, 02:35 PM
#38
Originally Posted by kcauto03
attention!! To all the guys using EU... dont leave the key at on position more than 5 min, it will fire the coil
