Professional analysis and pictures of our 6MT internals
#202
Registered User
Join Date: Jun 2007
Location: Tims Ford Lake TN
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Here is Todd's (BuiltZmotors) transmission problems. Half way down 2nd page are
the pictures of broken 3rd gear. https://my350z.com/forum/engine-driv...6-speed-2.html
the pictures of broken 3rd gear. https://my350z.com/forum/engine-driv...6-speed-2.html
#206
just wondering if this thread has died out cause its great... ok questions
1. does anyone offer syncro kits (dealer or aftermarket)
2. I'm guessing from what I've read up grades are still not avalible??
sorry if its been talked about b4 haven't been on this fourm in quite a while
1. does anyone offer syncro kits (dealer or aftermarket)
2. I'm guessing from what I've read up grades are still not avalible??
sorry if its been talked about b4 haven't been on this fourm in quite a while
#207
Registered User
Join Date: Jan 2006
Location: Sweden
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
HEY! i just found this!
http://www.quaife.co.uk/60G-6-speed-...0Z-fitting-kit
EDIT!!! its only good up to 450hp from what i can understand...typical
http://www.quaife.co.uk/60G-6-speed-...0Z-fitting-kit
EDIT!!! its only good up to 450hp from what i can understand...typical
#209
Turbo Whore
Thread Starter
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
HEY! i just found this!
http://www.quaife.co.uk/60G-6-speed-...0Z-fitting-kit
EDIT!!! its only good up to 450hp from what i can understand...typical
http://www.quaife.co.uk/60G-6-speed-...0Z-fitting-kit
EDIT!!! its only good up to 450hp from what i can understand...typical
#210
Registered User
Join Date: Jan 2006
Location: Sweden
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
the whining i whould mind at all. but for that price and its only good to 450hp forgeaboutit!
to something else.. what kind of oil do you use? i had the redline shockproof etc etc..
to something else.. what kind of oil do you use? i had the redline shockproof etc etc..
#211
New Member
iTrader: (20)
haha...you sure about that? ***** deafening...
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/dmJH84FnQa8&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/dmJH84FnQa8&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/dmJH84FnQa8&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/dmJH84FnQa8&hl=en&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
#212
Registered User
Join Date: Jan 2006
Location: Sweden
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
actually i just think thats porno for my ears!(maybe just this clip was overkill) the thing is that i want a hardcore racecar and ive heard alot of cars with straight gears and whining LSD and i think its cool.
but oh my.. this clip was extreme! i dont think it would sound that bad
but oh my.. this clip was extreme! i dont think it would sound that bad
#213
Turbo Whore
Thread Starter
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
I use redline MT-90. You should not use the shockproof stuff in our trans, it will eventually ruin the synchros. Redline's line of shockproof gear oil is no designed for snychromesh transmissions.
#214
Registered User
Join Date: Jan 2006
Location: Sweden
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
I bet that transmission could handle A LOT more than 450hp. They just don't want to liability of saying that. Same thing with DSS's upgraded half-shafts, I have the level 2s and have A LOT more power than they are "rated" for with no issues whatsoever.
I use redline MT-90. You should not use the shockproof stuff in our trans, it will eventually ruin the synchros. Redline's line of shockproof gear oil is no designed for snychromesh transmissions.
I use redline MT-90. You should not use the shockproof stuff in our trans, it will eventually ruin the synchros. Redline's line of shockproof gear oil is no designed for snychromesh transmissions.
hmm...im pretty sure it was called MT90 AND shock proof.. but ill check.
well.. with my luck and if something would happend then Quaife would just say that i have to mutch power. ( i have just ordered a Greddy TT kit)
#215
Professional
iTrader: (2)
just wondering if this thread has died out cause its great... ok questions
1. does anyone offer syncro kits (dealer or aftermarket)
2. I'm guessing from what I've read up grades are still not avalible??
sorry if its been talked about b4 haven't been on this fourm in quite a while
1. does anyone offer syncro kits (dealer or aftermarket)
2. I'm guessing from what I've read up grades are still not avalible??
sorry if its been talked about b4 haven't been on this fourm in quite a while
See post #180.
PAR in Austrailia quoted me an entire new gear set and synchro's for $4200. My contact there is Sam Chalak. Ph: +612 9820 1100.
Also, it is worth noting that they also can make the gear set with standard or custom gear ratios.
I just sent Sam an e-mail asking if we could save any money if we coordinate a group buy on this.
#216
Registered User
iTrader: (1)
FYI... I ran that Quaife transmission (in 5 speed form) in my 240Z and its fricking wonderful! It will spoil you something awful and make you look like a shifting God. And for those worrying about horsepower ratings, remember, the stock transmissions in the 350Z are rated to 300 ft. lbs. and lots of folks are pushing more then that through them.
#217
Registered User
Join Date: Jan 2006
Location: Sweden
Posts: 469
Likes: 0
Received 0 Likes
on
0 Posts
See post #180.
PAR in Austrailia quoted me an entire new gear set and synchro's for $4200. My contact there is Sam Chalak. Ph: +612 9820 1100.
Also, it is worth noting that they also can make the gear set with standard or custom gear ratios.
I just sent Sam an e-mail asking if we could save any money if we coordinate a group buy on this.
PAR in Austrailia quoted me an entire new gear set and synchro's for $4200. My contact there is Sam Chalak. Ph: +612 9820 1100.
Also, it is worth noting that they also can make the gear set with standard or custom gear ratios.
I just sent Sam an e-mail asking if we could save any money if we coordinate a group buy on this.
good. and that the whole set? all gears and synchros?
#219
Turbo Whore
Thread Starter
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
well.. with my luck and if something would happend then Quaife would just say that i have to mutch power. ( i have just ordered a Greddy TT kit)
#220
Turbo Whore
Thread Starter
iTrader: (4)
Join Date: Oct 2002
Location: West suburbs of Chi-town
Posts: 7,303
Likes: 0
Received 1 Like
on
1 Post
See post #180.
PAR in Austrailia quoted me an entire new gear set and synchro's for $4200. My contact there is Sam Chalak. Ph: +612 9820 1100.
Also, it is worth noting that they also can make the gear set with standard or custom gear ratios.
I just sent Sam an e-mail asking if we could save any money if we coordinate a group buy on this.
PAR in Austrailia quoted me an entire new gear set and synchro's for $4200. My contact there is Sam Chalak. Ph: +612 9820 1100.
Also, it is worth noting that they also can make the gear set with standard or custom gear ratios.
I just sent Sam an e-mail asking if we could save any money if we coordinate a group buy on this.