vortech FAQ: read this before asking vortech questions
#1881
New Member
iTrader: (79)
Are you going to install the injectors then take it Church? I'm not sure if you can drive the car without a tune and 600 injectors in it....
What I did was take my car beforehand to Church and have them install Osiris and a base map for the bigger injectors in my car....then I switched to the oem injector map when I drive home, and then switched to the new injector map after I installed my bigger injectors then drove it in for the full tune...
What I did was take my car beforehand to Church and have them install Osiris and a base map for the bigger injectors in my car....then I switched to the oem injector map when I drive home, and then switched to the new injector map after I installed my bigger injectors then drove it in for the full tune...
Last edited by 350z006; 08-29-2012 at 01:30 PM.
#1882
Registered User
iTrader: (11)
Are you going to install the injectors then take it Church? I'm not sure if you can drive the car without a tune and 600 injectors in it....
What I did was take my car beforehand to Church and have them install Osiris and a base map for the bigger injectors in my car....then I switched to the oem injector map when I drive home, and then switched to the new injector map after I installed my bigger injectors then drove it in for the full tune...
What I did was take my car beforehand to Church and have them install Osiris and a base map for the bigger injectors in my car....then I switched to the oem injector map when I drive home, and then switched to the new injector map after I installed my bigger injectors then drove it in for the full tune...
#1883
Registered User
iTrader: (6)
Join Date: Mar 2008
Location: us
Posts: 1,205
Likes: 0
Received 0 Likes
on
0 Posts
i've been reading on and off of this thread; finally got mine installed and tuned however it doesnt really sound like the G35 on the first page.
On my car, it sounds louder also at idel the car kind of shakes; does anyone know the cause of the problem? i'm afraid something bad will happen becasue it doesn't seem right even though its been tuned and inspected.
lastly something new happened the car makes a lot of vibrating sound when i turn on the a/c without the car on, not how it used to be
help please?
On my car, it sounds louder also at idel the car kind of shakes; does anyone know the cause of the problem? i'm afraid something bad will happen becasue it doesn't seem right even though its been tuned and inspected.
lastly something new happened the car makes a lot of vibrating sound when i turn on the a/c without the car on, not how it used to be
help please?
#1887
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
If it still idles at 650rpms like stock then the gears in the super charger will rattle and shake. When you use the a/c it loads the engine more which makes the rattling worse. usually increasing the idle to around 800rpms fixes that rattle. Switching to a smaller pulley will also spin the gears faster at idle and reduce the gear noise.
#1888
Registered User
iTrader: (15)
If it still idles at 650rpms like stock then the gears in the super charger will rattle and shake. When you use the a/c it loads the engine more which makes the rattling worse. usually increasing the idle to around 800rpms fixes that rattle. Switching to a smaller pulley will also spin the gears faster at idle and reduce the gear noise.
#1889
Registered User
iTrader: (1)
So I'm about to install it Next Monday, please let me know if I do anything the wrong steps.
-Vortech V3 complete kit
-Headers
-3.12 Pulley
-Tranny Cooler
-Guages A/F, Oil Temp, Boost
-Re-tune the SS Box
-Either Cipher or Osiris to raise idle RPM and speed limiter
Thanks =)
-Vortech V3 complete kit
-Headers
-3.12 Pulley
-Tranny Cooler
-Guages A/F, Oil Temp, Boost
-Re-tune the SS Box
-Either Cipher or Osiris to raise idle RPM and speed limiter
Thanks =)
#1890
Registered User
iTrader: (11)
So I'm about to install it Next Monday, please let me know if I do anything the wrong steps.
-Vortech V3 complete kit
-Headers
-3.12 Pulley
-Tranny Cooler
-Guages A/F, Oil Temp, Boost
-Re-tune the SS Box
-Either Cipher or Osiris to raise idle RPM and speed limiter
Thanks =)
-Vortech V3 complete kit
-Headers
-3.12 Pulley
-Tranny Cooler
-Guages A/F, Oil Temp, Boost
-Re-tune the SS Box
-Either Cipher or Osiris to raise idle RPM and speed limiter
Thanks =)
Sell the headers and go with either an exhaust or upgraded oil cooler
#1892
Registered User
iTrader: (3)
Join Date: Apr 2012
Location: coachella, california
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
mods. 6manual tran.
v2 vortech. 3.12 pulley made 7psi
test pipes, stillen dual exhaust
pletnum spacer.
all this was on a 91 octane.
#1894
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
any dyno results from members with the 3.12 pulley. my car got tune 2 days ago uprev-Osiris and i think there's sow thing wrong on it. made 330whp temp was a little hot 101 degrees and about 60% humidity.
mods. 6manual tran.
v2 vortech. 3.12 pulley made 7psi
test pipes, stillen dual exhaust
pletnum spacer.
all this was on a 91 octane.
mods. 6manual tran.
v2 vortech. 3.12 pulley made 7psi
test pipes, stillen dual exhaust
pletnum spacer.
all this was on a 91 octane.
can you post a dyno sheet? so many variables it is hard to say anything. Could be a really low dyno reading but with only 7psi of boost the hp sounds about right. Now just to figure out why it was only 7psi of boost on 3.12 pulley. Usually it is higher than that.
#1897
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
It fits with plenty of clearance but it's a real pain to get in place properly. When getting it into place it is a really tight fit but once it is in the proper location it has plenty of room between the engine and the fans.
#1899
Registered User
iTrader: (3)
Join Date: Apr 2012
Location: coachella, california
Posts: 382
Likes: 0
Received 0 Likes
on
0 Posts
sorry guys haven't been hable to upload a pic of the dyno I don't have a resource to a computer I've been using my phone to log in. so far I found a crack on my kinetix V+ intake pletnum (don't ever buy it it's not worth the 300) so I replaced it with my oem on and now I've been seen close to 10psi on my gauge and the weather it's been around 110 degrees since I live in the desert but so far my car feels better even though I'm gonna have to get re-tune since I'm getting more psi. tomorrow in gonna be working on the custom idler pulley for the belt slip I don't think I have one but just in case I do.