Official STS Rear Mount Turbo Discussion Thread
#1661
Registered User
Join Date: Feb 2009
Location: St. pete FL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
alright so i have a shitty mbc and im torn if i should get a gm ebcs or mbc? i used to only run ebcs in my sti but what do you guys think for the utec? faster spool using a gm or mbc? and to run a ebcs one side to constant 12v and other to port 2?
#1662
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
If you can afford an EBC then get them, search this thread coz DanielW and Ashmo both had an EBC and they got good review. Even with a BCS you wont get the quick same response as a good EBC. I believe DanielW had a speed/gear dependent boost control and he was able to adjust his boost on each gear, this allow him to hit full boost on 1st gear.
#1663
Registered User
Join Date: Feb 2009
Location: St. pete FL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
If you can afford an EBC then get them, search this thread coz DanielW and Ashmo both had an EBC and they got good review. Even with a BCS you wont get the quick same response as a good EBC. I believe DanielW had a speed/gear dependent boost control and he was able to adjust his boost on each gear, this allow him to hit full boost on 1st gear.
thanks yea my friend has a basically brand new greddy e01 hes gonna sell to me for 100 and theyre almost 600 brand new
#1665
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
They can work with you. I was able to buy their "tuning kit" which included everything (minus the typical missing pieces, haha) except the fuel system and EMS. I actually bought it without the turbo and intercooler as well, as I bought those used from goosegoose, so they definitely worked everything out for me.
#1666
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Hey Johnny I like your vids on youtube I just happened to come across some of them of your old supercharged and now sts setup. Why don't you just do the DW 600cc's and call it a day? I have those and they run, start and idle perfectly fine with the utec. Also, buy new, I just wouldn't want to buy used injectors to save a few hundred bucks with so much at stake.
I'd love to get the 600's, but I'm sick of spending $400 here, $500 there, etc. It just never ends. I do know that I'm taking a risk with used ones though. I'm hoping some ~600 DW's come up for sale in the FS section sometime soon.
athenG - Do you have the older overrated DW's like me? Or were you just saying you have some old DW's? I know the stock kit comes with true 440's, so I would think I would be fine with those. But I obviously don't want to burn the things up running them at max duty cycle all of the time.
#1668
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
athenG - Do you have the older overrated DW's like me? Or were you just saying you have some old DW's? I know the stock kit comes with true 440's, so I would think I would be fine with those. But I obviously don't want to burn the things up running them at max duty cycle all of the time.
#1669
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I forget which pin you hook it up to, but yes, you simply wire the BCS ground into the UTEC, and the other to a 12v source.
#1670
Registered User
iTrader: (19)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I have the old rating DW too.. Have you look at the RFS? There are some added benefit of having a RFS and this will also allow you you to bump your FP just enough to stay on the safe side. I dont usually race below freezing so I'm just bring down my boost to 7psi and I'm golden, above 40F I'm still good and around 90-93 IDC at near redline. Above 60F I'm golden so I dont really need a bigger injector so I figured a RFS will give me that FP stability and an extra bump in fuel in the winter... This is just my .02 though.. I have been running above 90% IDC and so far so good but I dont usually stay in redline all the time. I think 90% is not as bad as long as you dont stay there for long...
I don't track the thing, so I'm not worried about running the car that hard for a long time. The only time I keep on it is during cruise events where I have to keep it pegged in order to keep up with Ford GT's, Vettes, and Lambos.
#1672
Registered User
Join Date: Feb 2009
Location: St. pete FL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I'm going the UTEC BCS route (using the TurboXS solenoid), although not too many people have been happy with it. So far I'm getting some major wastegate fluttering, but I'm hoping an upgraded spring will fix that.
I forget which pin you hook it up to, but yes, you simply wire the BCS ground into the UTEC, and the other to a 12v source.
I forget which pin you hook it up to, but yes, you simply wire the BCS ground into the UTEC, and the other to a 12v source.
maybe im retarded but i couldnt seem to find the turboxs bcs anywhere...
#1674
Registered User
Join Date: Feb 2009
Location: St. pete FL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
do any of you tune your own utec? if so i might have some Qs its going to be my first time messing with a utec unit but ive been reading the manual religiously so i think i got it down just not too much info on setting up a 2step and no lift shift
#1676
Registered User
Join Date: Feb 2009
Location: St. pete FL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
really!? damni could have sworn i read something on launch control and flat foot
also read about the wot box how do you feel about that?
not anything major but i know the basics i had a 400whp sti on pump gas and i helped with tuning i could have tuned it myself but i figured i built it and put all my time and sweat in it i wanted a perfect tune
also read about the wot box how do you feel about that?
not anything major but i know the basics i had a 400whp sti on pump gas and i helped with tuning i could have tuned it myself but i figured i built it and put all my time and sweat in it i wanted a perfect tune
#1678
Registered User
Join Date: Feb 2009
Location: St. pete FL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
yea it looked sketchy lol when i saw it... damn i want flat foot shifting!!!! ill be building a block soon and probably going with a front mount turbo system but that wont be for like a year so i want to see what i can squeeze out of this setup... someone has a nice 35r forsale on a local forum for 850 i might pick up and throw on for some more power and faster spool... im just not sure if i want to run a coolant line all the way back there then back to the block if i do it will be ss lines but ehhh idk yet so many option i have up in the air at the moment
btw where in nyc are you? im from staten island
#1679
Registered User
iTrader: (2)
Join Date: Nov 2005
Location: NYC
Posts: 2,252
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
LOL I'm from Staten Island too... If you want flat shifting then one vendor sell them here.. https://my350z.com/forum/product-ann...ft-module.html
#1680
Registered User
Join Date: Feb 2009
Location: St. pete FL
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
LOL I'm from Staten Island too... If you want flat shifting then one vendor sell them here.. https://my350z.com/forum/product-ann...ft-module.html