NE1 removed PCV on passenger side valve cover?
12-04-2008 | 06:26 PM
#88
12-04-2008 | 07:16 PM
#90
You will probably need something like a 5/8 id cap.
Last edited by ToastZ; 04-17-2009 at 02:58 PM.
12-05-2008 | 05:14 AM
#94
two months ago i did a homemade catch can from this thread
https://my350z.com/forum/engine-driv...catch-can.html
i got this hose from home depot.. but its flexing and shrinking too much with heat..
i ordered some SS Lines and Andonized Fittings from corvette accesories per gothchick's suggestion..
i'm going to redo the catch can with the new hose and fittings this weekend.. and also do the breather filter on the drivers side
here is her car with the new lines and fittings
https://my350z.com/forum/engine-driv...catch-can.html
i got this hose from home depot.. but its flexing and shrinking too much with heat..
i ordered some SS Lines and Andonized Fittings from corvette accesories per gothchick's suggestion..
i'm going to redo the catch can with the new hose and fittings this weekend.. and also do the breather filter on the drivers side
here is her car with the new lines and fittings
12-05-2008 | 07:03 AM
#95
doug,
as you already know....that hose sucks. it collapses with heat and vaccum! if you want a cheaper alternative to the braided lines, go to your local auto parts store and look for "high pressure" hose or "fuel injection" hose. they should have it behind the counter. Just ask them if you can look through the hoses in the back.
as you already know....that hose sucks. it collapses with heat and vaccum! if you want a cheaper alternative to the braided lines, go to your local auto parts store and look for "high pressure" hose or "fuel injection" hose. they should have it behind the counter. Just ask them if you can look through the hoses in the back.
12-05-2008 | 07:14 AM
#96
doug,
as you already know....that hose sucks. it collapses with heat and vaccum! if you want a cheaper alternative to the braided lines, go to your local auto parts store and look for "high pressure" hose or "fuel injection" hose. they should have it behind the counter. Just ask them if you can look through the hoses in the back.
as you already know....that hose sucks. it collapses with heat and vaccum! if you want a cheaper alternative to the braided lines, go to your local auto parts store and look for "high pressure" hose or "fuel injection" hose. they should have it behind the counter. Just ask them if you can look through the hoses in the back.
what i need to find though is that bracket she has to mount it
12-05-2008 | 07:20 AM
#97
Thread Starter
New Member
iTrader: (18)
Joined: Jul 2005
Posts: 6,474
Likes: 65
From: Chapel Hill, NC
Use it as another vacuum source: during boost! (check valve required) Use SAE J30-R7 or -R9 fuel injection hose (the latter is really expensive per foot). I doubt R7 would collapse at the low vacuum levels it sees even when hot. I used it for a long run across the front of the car (from pass side catch catch to vacuum source on driver's side intake pipe).
Last edited by rcdash; 12-05-2008 at 07:24 AM.
12-05-2008 | 07:39 AM
#98
Use it as another vacuum source: during boost! (check valve required) Use SAE J30-R7 or -R9 fuel injection hose (the latter is really expensive per foot). I doubt R7 would collapse at the low vacuum levels it sees even when hot. I used it for a long run across the front of the car (from pass side catch catch to vacuum source on driver's side intake pipe).
sound like i might need a T Fitting too
12-05-2008 | 09:24 AM
#100
Nice pics doug...please post pics of your driver side mods too when you get to it...
two months ago i did a homemade catch can from this thread
https://my350z.com/forum/engine-driv...catch-can.html
i got this hose from home depot.. but its flexing and shrinking too much with heat..
i ordered some SS Lines and Andonized Fittings from corvette accesories per gothchick's suggestion..
i'm going to redo the catch can with the new hose and fittings this weekend.. and also do the breather filter on the drivers side
here is her car with the new lines and fittings
https://my350z.com/forum/engine-driv...catch-can.html
i got this hose from home depot.. but its flexing and shrinking too much with heat..
i ordered some SS Lines and Andonized Fittings from corvette accesories per gothchick's suggestion..
i'm going to redo the catch can with the new hose and fittings this weekend.. and also do the breather filter on the drivers side
here is her car with the new lines and fittings