My Build: The Good, The Bad & The Progress
#2042
Registered User
iTrader: (10)
Join Date: Feb 2006
Location: OC
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I don't use any waxes, it's kinda like high polish wheels. The more they are exposed to the elements the more tarnished they can get. A decent cleaning every once in a while should be enough, unless you plan on driving it in the rain with open hood vents. Even then, it's just water spots which are not much of an issue.
#2043
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Chris,
I followed SPR's instructions when I installed the tripple pump hangar, but it was a little noisy. I think the Walbros were vibrating inside the hangar. You might want to tap and thread the hanger so that you can use a screw or bolt to secure the Walbros in a little tighter. That should reduce the noise. Here is a drawing showing approximately where I would put the screw or bolt for each Walbro.
![](http://home.comcast.net/~kf1167/pwpimages/3644.jpg)
I followed SPR's instructions when I installed the tripple pump hangar, but it was a little noisy. I think the Walbros were vibrating inside the hangar. You might want to tap and thread the hanger so that you can use a screw or bolt to secure the Walbros in a little tighter. That should reduce the noise. Here is a drawing showing approximately where I would put the screw or bolt for each Walbro.
![](http://home.comcast.net/~kf1167/pwpimages/3644.jpg)
Probably needless to say, but I will anyway, use short screws/bolts and don't over tighten them. You don't want to damage the Walbros!
FYI, if you need another Walbro pump, let me know. I still have 2 extras that I bought with the hangar. I'll cut you a good deal. Note that these fit the SPR tripple pump hangar, but not the stock factory swirl tank. The connector is in a different location. That said, the Walbro's that do fit the factory swirl tank also will work with the hangar.
Last edited by ttg35fort; 08-25-2009 at 02:48 PM.
#2044
#2049
![Default](https://my350z.com/forum/images/icons/icon1.gif)
![](https://my350z.com/forum/images/smilies/icon14.gif)
As long as Dave and Frank have all the assorted gaskets and such that they may need, things should progress smoothly over the next week. I have stressed to both of them to please be uber careful to not scratch the newly painted engine bay. Depending on the break-in schedule, I may have the car back next week or the week after.
It was slightly painful driving south on I-81 and seeing a constant parade of corvettes headed north to the Corvettes at Carlisle event in PA. Seemed like every old white guy with a ZR1 was headed north. Sooooo many potential beatdowns to be given there
![Cool](https://my350z.com/forum/images/smilies/cool.gif)
#2051
![Default](https://my350z.com/forum/images/icons/icon1.gif)
A couple of pics from the past few days:
My truck was packed solid with parts, the stuff in towels and sheets is powdercoated or painted stuff.
![My Build: The Good, The Bad & The Progress-p8270393.jpg](https://my350z.com/forum/attachments/forced-induction/256069d1251545286t-my-build-the-good-the-bad-and-the-progress-p8270393.jpg)
The new system at F:T, builds are put on racks that follow the cars around the shop.
![My Build: The Good, The Bad & The Progress-p8270400.jpg](https://my350z.com/forum/attachments/forced-induction/256070d1251545420t-my-build-the-good-the-bad-and-the-progress-p8270400.jpg)
Fram left to right, Karim's G on the lift (I think, the owner is under the car, but I didn't have a chance to meet him), Ahn's car waiting on parts, mystery Z (silver) and my big blue paperweight. Tuna loves my car cause it smells like bagels
.
![My Build: The Good, The Bad & The Progress-p8270402.jpg](https://my350z.com/forum/attachments/forced-induction/256071d1251545420t-my-build-the-good-the-bad-and-the-progress-p8270402.jpg)
My navigator for day one of parts delivery, he loves Tuna and can't wait for the blue car to come home. A future modder..... for sure
.
My truck was packed solid with parts, the stuff in towels and sheets is powdercoated or painted stuff.
![My Build: The Good, The Bad & The Progress-p8270394.jpg](https://my350z.com/forum/attachments/forced-induction/256068d1251545286t-my-build-the-good-the-bad-and-the-progress-p8270394.jpg)
![My Build: The Good, The Bad & The Progress-p8270393.jpg](https://my350z.com/forum/attachments/forced-induction/256069d1251545286t-my-build-the-good-the-bad-and-the-progress-p8270393.jpg)
The new system at F:T, builds are put on racks that follow the cars around the shop.
![My Build: The Good, The Bad & The Progress-p8270400.jpg](https://my350z.com/forum/attachments/forced-induction/256070d1251545420t-my-build-the-good-the-bad-and-the-progress-p8270400.jpg)
Fram left to right, Karim's G on the lift (I think, the owner is under the car, but I didn't have a chance to meet him), Ahn's car waiting on parts, mystery Z (silver) and my big blue paperweight. Tuna loves my car cause it smells like bagels
![](https://my350z.com/forum/images/smilies/icon17.gif)
![My Build: The Good, The Bad & The Progress-p8270402.jpg](https://my350z.com/forum/attachments/forced-induction/256071d1251545420t-my-build-the-good-the-bad-and-the-progress-p8270402.jpg)
My navigator for day one of parts delivery, he loves Tuna and can't wait for the blue car to come home. A future modder..... for sure
![](https://my350z.com/forum/images/smilies/icon44.gif)
![My Build: The Good, The Bad & The Progress-p8270403.jpg](https://my350z.com/forum/attachments/forced-induction/256072d1251545420t-my-build-the-good-the-bad-and-the-progress-p8270403.jpg)
Last edited by Cass007; 08-29-2009 at 03:42 AM.
#2057
![Default](https://my350z.com/forum/images/icons/icon1.gif)
OK, I waasn't going to post till the car was done, but I'm all drunk and had one of my Corvette friends chirping at me all evening, so here is an update....
The polished cover IMO is meh at best, I really miss my blue powdercoated cover, oilers and valve covers, but if this motor runs I should be happy
![My Build: The Good, The Bad & The Progress-p9030323.jpg](https://my350z.com/forum/attachments/forced-induction/257237d1252019816t-my-build-the-good-the-bad-and-the-progress-p9030323.jpg)
A pic of my monster on the lift yet again.... this is how I think of my car![](https://my350z.com/forum/images/smilies/icon27.gif)
![My Build: The Good, The Bad & The Progress-p9030326.jpg](https://my350z.com/forum/attachments/forced-induction/257238d1252020010t-my-build-the-good-the-bad-and-the-progress-p9030326.jpg)
Parts waiting to go back on, but unforseen delays, the build was delayed a bit, no car for Labor Day weekend, but Frank and Dave are doing good work and the end result should be worth the extra wait.
The polished cover IMO is meh at best, I really miss my blue powdercoated cover, oilers and valve covers, but if this motor runs I should be happy
![My Build: The Good, The Bad & The Progress-p9030321.jpg](https://my350z.com/forum/attachments/forced-induction/257235d1252019816t-my-build-the-good-the-bad-and-the-progress-p9030321.jpg)
![My Build: The Good, The Bad & The Progress-p9030322.jpg](https://my350z.com/forum/attachments/forced-induction/257236d1252019816t-my-build-the-good-the-bad-and-the-progress-p9030322.jpg)
![My Build: The Good, The Bad & The Progress-p9030323.jpg](https://my350z.com/forum/attachments/forced-induction/257237d1252019816t-my-build-the-good-the-bad-and-the-progress-p9030323.jpg)
A pic of my monster on the lift yet again.... this is how I think of my car
![](https://my350z.com/forum/images/smilies/icon27.gif)
![My Build: The Good, The Bad & The Progress-p9030326.jpg](https://my350z.com/forum/attachments/forced-induction/257238d1252020010t-my-build-the-good-the-bad-and-the-progress-p9030326.jpg)
Parts waiting to go back on, but unforseen delays, the build was delayed a bit, no car for Labor Day weekend, but Frank and Dave are doing good work and the end result should be worth the extra wait.
Last edited by Cass007; 09-03-2009 at 03:29 PM. Reason: drunken edit
#2059
Registered User
iTrader: (1)
Join Date: Sep 2007
Location: Texas, Arizona,Cayman Island
Posts: 5,256
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Looks good Chris....but I thought you would be a little taller than you look in the pic ![dunno](https://my350z.com/forum/images/smilies/dunno.gif)
![Confused](https://my350z.com/forum/images/smilies/confused.gif)
![dunno](https://my350z.com/forum/images/smilies/dunno.gif)
--> Attachment 256072 <---
![dunno](https://my350z.com/forum/images/smilies/dunno.gif)
![Confused](https://my350z.com/forum/images/smilies/confused.gif)
![dunno](https://my350z.com/forum/images/smilies/dunno.gif)
--> Attachment 256072 <---
Last edited by XKR; 09-03-2009 at 03:44 PM.