Another GTM Install
#181
Registered User
iTrader: (10)
Join Date: Feb 2009
Location: puyallup WA
Posts: 3,016
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Guys, I have been bit hard and it hurts. Bit by the modification bug.... everything on the list will be complete (except LSD) when I pick the car up Saturday. I was going to wait but then its like why am I waiting. I won't be happy till its all done and I can get my life back and quite researching everything to the 10th degree. So I spoke to John @ Z1 this morning and he is installing the Akebono brake upgrade complete with stainless lines and 40th Anniversary Red calipers. While their at it they are going to install Tein H Tech springs to provide a modest drop. So in the last week and in addition to the twin turbos I have also added:
1. Quaiffe
2. Akebono Brakes
3. Tein H Tech to lower
4. Enkei PF01 Wheels
5. Nitto Tires
6. what else is there?
So here is the complete list:
Any other suggestions while I'm at it? I just want to thank John, Will, Russel, and the whole crew at Z1 Motorsports in Carollton, GA for convincing me to spend all this money. I can't even fathom what this transformation is going to feel like when I drive it off from the shop.
If this doesn't get you pumped up, you don't have a pulse.
Thanks.
Jay
1. Quaiffe
2. Akebono Brakes
3. Tein H Tech to lower
4. Enkei PF01 Wheels
5. Nitto Tires
6. what else is there?
So here is the complete list:
- GTM Stage 2 TT Kit for HR
- GTM 3" Downpipes and Recirculation (Externally Waste Gated)
- GTM 3" Exhaust
- OSIRIS Uprev ECU programming
- Deatchworks 600cc Fuel Injectors
- Walbro 255 l/h Fuel Pump
- OS Giken Twin Disc Clutch
- Heavy Duty CSC with Stainless Clutch Line
- Complete Defi Gauge Setup (boost, oil press, water temp, wideband a/f)
- Blitz Boost Controller
- KP Technologies Two-step & No Lift Shift
- Quaiffe LSD
- 40th Anniversary Red Akebono BBK, Stainless lines, cross drilled/slotted rotors
- Enkei PF01 18x9.5 +15 on all four corners
- Tein H Tech Lowering Springs
- Nitto NT555 285-40-18 Tires
Any other suggestions while I'm at it? I just want to thank John, Will, Russel, and the whole crew at Z1 Motorsports in Carollton, GA for convincing me to spend all this money. I can't even fathom what this transformation is going to feel like when I drive it off from the shop.
If this doesn't get you pumped up, you don't have a pulse.
Thanks.
Jay
SPL rear camber arms and traction links for some good adjustment on ur rear wheels and id call it a day
![Big Grin](https://my350z.com/forum/images/smilies/biggrin.gif)
![suicide](https://my350z.com/forum/images/smilies/suicide.gif)
#190
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Just a quick update on the car. We are working through a small boost issue where the car will not boost more than 7psi. However, the car put down 433whp @ 7psi. I think we are going to take it to a max boost of 10-11 psi so we should be in the 500+ range when its done.
If anyone has the GTM kit, external gates and EBC, please hit me up. I need to verify how your boost/vacuum lines are routed.
My understanding is boost input from charge pipe (pre-throttlebody) >> bottom wastegate ports + input on boost solenoid, output from solenoid to top of the wastegates, and reference boost/vacuum from manifold to back of controller unit. Let me know if this sounds right.
Some more eye candy...parts wheels/tires came in...
![](http://www.wallerweb.com/350z/2011-10-12_18-22-58_568.jpg)
![](http://www.wallerweb.com/350z/2011-10-12_18-23-08_593.jpg)
If anyone has the GTM kit, external gates and EBC, please hit me up. I need to verify how your boost/vacuum lines are routed.
My understanding is boost input from charge pipe (pre-throttlebody) >> bottom wastegate ports + input on boost solenoid, output from solenoid to top of the wastegates, and reference boost/vacuum from manifold to back of controller unit. Let me know if this sounds right.
Some more eye candy...parts wheels/tires came in...
![](http://www.wallerweb.com/350z/2011-10-12_18-22-58_568.jpg)
![](http://www.wallerweb.com/350z/2011-10-12_18-23-08_593.jpg)
![](http://www.wallerweb.com/350z/2011-10-12_18-23-40_281.jpg)
#192
![Default](https://my350z.com/forum/images/icons/icon1.gif)
I knew someone would say that. It's hooked up right, just like the diagram. This is the first blitz dual sbc spec s they have installed with External Gate setup because its what I brought them. We think the solenoid is either malfunctioning or isn't playing with the twin setup. Unfortunately this is the first statement in the manual:
*The DSBC Spec S is not recommended for high boosting cars or cars with twin turbo or sequential turbo set ups.
*The DSBC Spec S is not recommended for high boosting cars or cars with twin turbo or sequential turbo set ups.
#194
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
The solenoid is always the same so that wouldn't be the issue. The issue would probably be with the setup of the duty cycle on the controller itself i would assume.
i'm sure it will get worked out. maybe it needs a second solenoid
#196
New Member
iTrader: (11)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Ya I was posting tonque in cheek
I wouldnt think plumbing would be any problem. is that BC using a standard MAC solenoid? (edit--- I guess not
) so ya thats proilly why they sell the R version with 2 solenoids.
But you'd figure those solenoids could cycle enough air for more than 7psi.
I assume the gates are set at 7psi?
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
![](https://www.nolimitmotorsport.com/2/blitz-BoostSpecS.jpg)
But you'd figure those solenoids could cycle enough air for more than 7psi.
I assume the gates are set at 7psi?
#197
![Default](https://my350z.com/forum/images/icons/icon1.gif)
i probably would have refrained from purchasing it if said this in the details.
The solenoid is always the same so that wouldn't be the issue. The issue would probably be with the setup of the duty cycle on the controller itself i would assume.
i'm sure it will get worked out. maybe it needs a second solenoid
The solenoid is always the same so that wouldn't be the issue. The issue would probably be with the setup of the duty cycle on the controller itself i would assume.
i'm sure it will get worked out. maybe it needs a second solenoid
With manual boost controller the car will boost and with wastegate side port disconnected it boosts past 7psi. You have to let off to keep from overboosting. the WG spring is actually a 5.80lb spring so its only allowing an additional 1psi of boost through.
Last edited by f150intally; 10-13-2011 at 09:56 AM.
#199
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Great news! John and the Z1 gang solved the boost mystery. Thanks to these guys for their persistence! The boost line going to the back of the controller was kinked in the dash so it was never regulating the valve properly. These guys are awesome.
Stand by for numbers in the near future.
Stand by for numbers in the near future.