Hi im still a little new to the z scene I have an 04 base z with turbonetics kit low comp. pistons and possibly forged rods?(don't ask long story and don't hate about the tn kit lol) anyways I am going to be getting bigger injectors here's a few questions


What cc injectors and brand would be best for more than 8lbs of boostl but would be good for once I upgrade turbo system and engine if that's possible?
how much boost can a stock z motor handle with low comp pistons we will say with stock rods because im unsure the kid had no clue about it, with a good uprev tune (Dyno tune)

I no this is wrong section for this but im looking into aftermarket lsds any suggestion price around 1200?

Just lmk what u think thanks I've ran Deatchwerks. Injectors on an rb didn't like em but let's see what people say thanks

 

If your rods are stock 450 whp max ...and I use 800cc deatchwerks and they work for me stock block 9.5 psi . but when I get larger ones ill go with injector dynamics 2000s

 

Well first thing's first find out what the hell kind of connecting rods you have. Buying a car with a possibly "built" engine and not knowing what is in it is a bad plan. Do some searching, seriously, do it. Nobody can tell you how much you can push your stock rods because everyone's seem to go at different times. Considering that your Z has already been boosted for what I would guess is a mileage unknown to you I wouldn't push it any further.

go here to read about injectors
https://my350z.com/forum/fi-faqs/331...formation.html
go here and read all about FI
https://my350z.com/forum/forced-indu...-noobs-18.html

 

If you are willing to upgrade engine management to something more robust, go with ID 1000cc plug&play injectors. They perform awesome, will give you room to turn it up and make more power in the future, and I can tune them to run just like stock. Does the car have stock or aftermarket headers?

 

I believe stock headers and im going to be going with an Osiris uprev tune speed and sound in st Louis is only 2 hours from me

 

+1 on Injector Dynamics. They cost a little more but are quality.

What other upgrades are you making to the kit? How do you plan on controlling boost?

 

Turbotech mbc I don't like electronic boost controllers and I Havnt really decided on what all upgrades I want to do I want headers, Idk what ones will work with the tn kit any other ideas for grades lmk and don't say replace the turbo kit caz that isn't going to happen until I get my other motor built

 

OS Giken LSD is one of the best, if not the best, LSD's you can buy for the 350z. I purchased mine for $1450 shipped brand new but they normally range in between $1500 to $1800 dollars.

 

Thanks ill look into that, also I think I may get 1000cc id injectors would that work for 450whp on an uprev Osiris tune?