Trying to install this thing but Im having problems. I have two two vacuum hoses under the throttle body and have no place to connect them on the new manifold. Any ideas?

 

Is there not a cooling block that comes separate with the plenum that you must screw onto the plenum... the hoses should connect to that.

 

it doesnt come w/ directions? 725$ and no directions is a shame

 

all the manifolds should have an install sheet with instructions.

There is a stainless coupler that connects the two coolant hoses underneath the manifold. This coupler should have been in the same bag as the other hardware

 

There is about a 1-1.5 inch steel tube with 2 brass elbows that are used to bypass the coolant stuff that is not needed on this manifold. Mine was there and it was in the envelope as Robert stated. I should have final dyno numbers tomorrow or Friday with my Vortech and the manifold installed if everything goes as planned.

 

I would be REALLY nice if after someone installs this, that they take pics and do a step by step DIY.

How bout it Andy! Since you got yours before me, it's up to you my friend! You know if I would have got mine first I would have done it!

 

Ok got it, there was a mis spelling on the instructions and the fitting was in the box.

 

so 1-10 how hard is install? im in the second shipment i belive

 

3-4

 

cool thanks