PPE Longtube Headers
The following users liked this post:
KingBaby (08-02-2016)
#582
New Member
iTrader: (58)
Headers came in today... Luckily someone was home to sign for them.
Initial impressions, packaging looks pretty good. Foam wrap, bubble wrap and a ton of peanuts. Unpacking the headers I can see some minor dings and dents. I'm a little surprised with this amount of packaging there was damage, but I guess it could have happened during transport from PPE to Jetcoat. I think the tubing seems thick enough for it not to be a factor on the inside, but still a little upsetting. I'm sure they'll get more damage during installation.
I got the correct headers as I ordered. Nonstepped with reducer at the merge. Coating looks pretty good and even. Welds look good too. I'll post some pictures tomorrow.
One big thing is that one of the headers is missing the O2 bung cap. The other side came with it. Looked and swifted through on the foam peanuts and couldn't find it. No PPE stickers either...
RDZ who do I need to talk to about the missing bung cap? Thanks.
Initial impressions, packaging looks pretty good. Foam wrap, bubble wrap and a ton of peanuts. Unpacking the headers I can see some minor dings and dents. I'm a little surprised with this amount of packaging there was damage, but I guess it could have happened during transport from PPE to Jetcoat. I think the tubing seems thick enough for it not to be a factor on the inside, but still a little upsetting. I'm sure they'll get more damage during installation.
I got the correct headers as I ordered. Nonstepped with reducer at the merge. Coating looks pretty good and even. Welds look good too. I'll post some pictures tomorrow.
One big thing is that one of the headers is missing the O2 bung cap. The other side came with it. Looked and swifted through on the foam peanuts and couldn't find it. No PPE stickers either...
RDZ who do I need to talk to about the missing bung cap? Thanks.
Last edited by Voboy; 09-17-2012 at 07:30 PM.
#583
Vendor - Former Vendor
Thread Starter
Join Date: Oct 2011
Location: Danbury
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
Headers came in today... Luckily someone was home to sign for them.
Initial impressions, packaging looks pretty good. Foam wrap, bubble wrap and a ton of peanuts. Unpacking the headers I can see some minor dings and dents. I'm a little surprised with this amount of packaging there was damage, but I guess it could have happened during transport from PPE to Jetcoat. I think the tubing seems thick enough for it not to be a factor on the inside, but still a little upsetting. I'm sure they'll get more damage during installation.
I got the correct headers as I ordered. Nonstepped with reducer at the merge. Coating looks pretty good and even. Welds look good too. I'll post some pictures tomorrow.
One big thing is that one of the headers is missing the O2 bung cap. The other side came with it. Looked and swifted through on the foam peanuts and couldn't find it. No PPE stickers either...
RDZ who do I need to talk to about the missing bung cap? Thanks.
Initial impressions, packaging looks pretty good. Foam wrap, bubble wrap and a ton of peanuts. Unpacking the headers I can see some minor dings and dents. I'm a little surprised with this amount of packaging there was damage, but I guess it could have happened during transport from PPE to Jetcoat. I think the tubing seems thick enough for it not to be a factor on the inside, but still a little upsetting. I'm sure they'll get more damage during installation.
I got the correct headers as I ordered. Nonstepped with reducer at the merge. Coating looks pretty good and even. Welds look good too. I'll post some pictures tomorrow.
One big thing is that one of the headers is missing the O2 bung cap. The other side came with it. Looked and swifted through on the foam peanuts and couldn't find it. No PPE stickers either...
RDZ who do I need to talk to about the missing bung cap? Thanks.
#584
New Member
iTrader: (3)
UPS made an attempt yesterday when I was out. I'm at home today, though!
Voboy, when you say "with reducer" what are you referring to? I thought the non-stepped all had them? E.g. the collector exits at 2.25" and transitions to 2.5":
I'm hoping that's what I'm getting b/c that reduction is important to keep velocity up on the low end.
Voboy, when you say "with reducer" what are you referring to? I thought the non-stepped all had them? E.g. the collector exits at 2.25" and transitions to 2.5":
I'm hoping that's what I'm getting b/c that reduction is important to keep velocity up on the low end.
#585
Super Moderator
MY350Z.COM
MY350Z.COM
iTrader: (8)
Got tracking for what i believe is my hardware kit this morning, should be here tomorrow. Busted knuckles, here i come.
#586
New Member
iTrader: (58)
UPS made an attempt yesterday when I was out. I'm at home today, though!
Voboy, when you say "with reducer" what are you referring to? I thought the non-stepped all had them? E.g. the collector exits at 2.25" and transitions to 2.5":
http://i224.photobucket.com/albums/d...ders03_061.jpg
I'm hoping that's what I'm getting b/c that reduction is important to keep velocity up on the low end.
Voboy, when you say "with reducer" what are you referring to? I thought the non-stepped all had them? E.g. the collector exits at 2.25" and transitions to 2.5":
http://i224.photobucket.com/albums/d...ders03_061.jpg
I'm hoping that's what I'm getting b/c that reduction is important to keep velocity up on the low end.
One of the prototype headers had no reducer.
Reducer:
No reducer:
#592
New Member
iTrader: (58)
So I shouldn't need or have received any bung cap to begin with! Sorry for the confusion.
Another question for you guys that have received them though... Are the welds around the primary flange going to the engine complete? Mine are partially welded and one of the tubes was not ported clean....
#595
Registered User
iTrader: (3)
Join Date: May 2009
Location: earth
Posts: 1,365
Likes: 0
Received 0 Likes
on
0 Posts
that looks good to me. ups attempted to deliver mine today, i called when i got home and they are holding at a location for pickup. will probably get them tomorrow but install wont be for a while yet
#596
New Member
iTrader: (58)
Here are a few of my main concerns...
big part of unfinished welding...the other side of it was just as big.
nasty inner piping... all others were clean and smooth
other flanges look like this.. probably strong enough but incomplete IMO
PPE's website photo for 350z headers look complete...and so were denchan350gt's headers
http://www.ppeengineering-onlinestor...?productId=247
big part of unfinished welding...the other side of it was just as big.
nasty inner piping... all others were clean and smooth
other flanges look like this.. probably strong enough but incomplete IMO
PPE's website photo for 350z headers look complete...and so were denchan350gt's headers
http://www.ppeengineering-onlinestor...?productId=247