DIY total N/A backyard build
#144
MOTORDYNE-MY350Z SPONSOR
iTrader: (53)
Let the nightmare begin....
[IMG][/IMG]
[IMG][/IMG]
The little ring of metal was how uneven the piping was as it was part of one of the primaries
[IMG][/IMG]
They aren't megans anymore.....
[IMG][/IMG]
If you look at the bottom tube and how it comes up short, so nice. At least the left side header looks like the pipes are somewhat even. I can't wait til my collector kit gets here, this is fun.
[IMG][/IMG]
[IMG][/IMG]
The little ring of metal was how uneven the piping was as it was part of one of the primaries
[IMG][/IMG]
They aren't megans anymore.....
[IMG][/IMG]
If you look at the bottom tube and how it comes up short, so nice. At least the left side header looks like the pipes are somewhat even. I can't wait til my collector kit gets here, this is fun.
Experimentation and exploration is where the real fun starts.
#148
What kinda gains did this guy see? Is it anything like SGash?
#149
New Member
iTrader: (8)
No, but 16whp and 30wtq over stock headers/test pipes. Those sg headers are absolutely beautiful but you guys need to pay closer attention to that thread and those headers aren't magical. Will say this, I am confident that I will have over 280rwtq if I pick up a couple peak hp thats great to. I am doing this collector upgrade, going over to RT tuning and dynoing. Then I will show if this idea totally sucked or not, I will also list the price of every part I purchased. I already showed using the revup lower plenum was not a good decision.
It's great that you keep detailed logs of your upgrades in this thread, I'm sure many people including myself have found it very useful. Unfortunately even if you list out all the parts you used to build these headers, most of us don't have your DIY skills to put them together. I know for sure i don't.
#150
Registered User
iTrader: (4)
hey i live in monmouth county new jersey, i have a 2003 350z with injen td exhaust, injen cai, brian crower stage 2 cams, plenum spacer, kinetix high flow cats, megan racing headers, and aam custom reflash and dynoed with 20 inch rims and tires on a dyno dynamics and got 285whp, 262 wtq i was thinking about uprev reflash at r/t tuning, do u thin i can sqeeuze some more power out? also cocky how much is this reflash in total with dyno tuning
#151
New Member
iTrader: (8)
hey i live in monmouth county new jersey, i have a 2003 350z with injen td exhaust, injen cai, brian crower stage 2 cams, plenum spacer, kinetix high flow cats, megan racing headers, and aam custom reflash and dynoed with 20 inch rims and tires on a dyno dynamics and got 285whp, 262 wtq i was thinking about uprev reflash at r/t tuning, do u thin i can sqeeuze some more power out? also cocky how much is this reflash in total with dyno tuning
#152
hey i live in monmouth county new jersey, i have a 2003 350z with injen td exhaust, injen cai, brian crower stage 2 cams, plenum spacer, kinetix high flow cats, megan racing headers, and aam custom reflash and dynoed with 20 inch rims and tires on a dyno dynamics and got 285whp, 262 wtq i was thinking about uprev reflash at r/t tuning, do u thin i can sqeeuze some more power out? also cocky how much is this reflash in total with dyno tuning
Last edited by 1cockyZ; 08-02-2009 at 08:22 PM.
#153
New Member
iTrader: (6)
PM Vince at RT tuning he posted right above you, 285whp on a dd would make your car faster than mine, what kind of mph you turn in 1/4? Gabe as far as my diy skills I can only hack and tack the real welding will be done by a professional, then I will perform the janitorial duties of polishing all internal welds. Although maybe I should learn to tig for fun....been talking about it for years now....I bought this book on welding and read it, I have miged up a downpipe, catback, intercooler piping but I need this done right cause getting the headers in and out is hell.
Congrats on the build, i'm looking forward to seeing the results on the header mods. I was really impressed by the lower end gain from the plenum swap as well
#154
350Z-holic
iTrader: (25)
hey i live in monmouth county new jersey, i have a 2003 350z with injen td exhaust, injen cai, brian crower stage 2 cams, plenum spacer, kinetix high flow cats, megan racing headers, and aam custom reflash and dynoed with 20 inch rims and tires on a dyno dynamics and got 285whp, 262 wtq i was thinking about uprev reflash at r/t tuning, do u thin i can sqeeuze some more power out? also cocky how much is this reflash in total with dyno tuning
1cockyZ: what is your time table to have these installed? I can't wait to see the final pics after they are finish being fab'd up.
#155
The collectors should be here tomorrow. So the bodies/cones need to be cut and tacked. To speed it up I need to cut off the other collector to get the merge bullets tacked up on both sides then its off to the welder. Then I need to install them on to the car to position the collector bodies and y pipe flanges, uninstall and give them back to the welder. Then install them finally, thats if I don't go with ceramic coating which will take more time. I will probably skip coating them as its a large part of the total cost and nothing is coated now so it wouldn't be a good comparison.
#159
New Member
iTrader: (8)
I'm very curious as well to see a graph, those numbers on a DD with 20" are out of this world given that you have a stock short block, no VVT adjustment, therefore no additional power pass stock, and not fully tuned. If you do have some dynos a baseline would be also good.
In any case, if your car is not fully tuned and only has a generic flash then there is no doubt that you will gain more power going with a custom Osiris Tune. And on that dyno you will surely break 290.
In any case, if your car is not fully tuned and only has a generic flash then there is no doubt that you will gain more power going with a custom Osiris Tune. And on that dyno you will surely break 290.
#160
New Member
iTrader: (13)
Fantastic thread I dont know how I missed it. Adam @ Z1 let me borrow this great racecar mag that explains everything cocky has been saying about header design and scavenging. I'm going to try and scan the article post it so people who dont understand can read it.
Its a sick article.
Its a sick article.