Injected Performance brings you HALTECH PLATINUM PNP STANDALONE
#1001
New Member
iTrader: (11)
post 1000!
so who's got it?? I/O box
http://cgi.ebay.com/ebaymotors/120749104608
digital inputs mean you can run a ETOH sensor without the Zeitronix box. Could also run a methanol flow sensor for real 3D meth injection . Just need the firmware to utilize those.
so who's got it?? I/O box
http://cgi.ebay.com/ebaymotors/120749104608
digital inputs mean you can run a ETOH sensor without the Zeitronix box. Could also run a methanol flow sensor for real 3D meth injection . Just need the firmware to utilize those.
Last edited by str8dum1; 07-25-2011 at 04:33 PM.
#1003
New version of ECU Manager out, with CAN Input/Output box support!
https://my350z.com/forum/forced-indu...nsion-box.html
https://my350z.com/forum/forced-indu...nsion-box.html
#1005
Registered User
Join Date: Jun 2008
Location: Dublins
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Did the onboard logging go in the later ecu software? Can't find it in the 1.09 version of the software. Have searched high and low on here and internet to see where it went to and if it's taken off or just hidden somewhere else. I'm talking about the ecu onboard logging (That used to fill up after a short time) Just wanted to see what my water temps where like under some WOTs'. Not having my mini pc hooked up or external gauges to monitor it at the moment.
#1007
Did the onboard logging go in the later ecu software? Can't find it in the 1.09 version of the software. Have searched high and low on here and internet to see where it went to and if it's taken off or just hidden somewhere else. I'm talking about the ecu onboard logging (That used to fill up after a short time) Just wanted to see what my water temps where like under some WOTs'. Not having my mini pc hooked up or external gauges to monitor it at the moment.
#1008
Registered User
Join Date: Jun 2008
Location: Dublins
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Cheers the little tab down at the bottom had dissapeared somehow on my little eee pc In the older ones it was accessed through the menu if I'm not miss-remembering? Thanks Hal
#1011
Registered User
iTrader: (1)
Join Date: Dec 2008
Location: SoCal
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Hal, any chance we'll see an E85 profiling feature on the Sport2000 boxes?
I'd have no issues adding a flex fuel sensor should the software become available to support the ECU switching automatically as it sees input from the flex sensor. I'd love to be able to mix pump and E85 without any concerns, as E85 is not readily available everywhere here in CA. It seems we really need a 3D map like Haltech has employed with the Pro ECUs.
I'd have no issues adding a flex fuel sensor should the software become available to support the ECU switching automatically as it sees input from the flex sensor. I'd love to be able to mix pump and E85 without any concerns, as E85 is not readily available everywhere here in CA. It seems we really need a 3D map like Haltech has employed with the Pro ECUs.
Last edited by MikeDavis; 12-29-2011 at 10:00 PM.
#1012
Chestons Toilet
iTrader: (70)
Hal, any chance we'll see an E85 profiling feature on the Sport2000 boxes?
I'd have no issues adding a flex fuel sensor should the software become available to support the ECU switching automatically as it sees input from the flex sensor. I'd love to be able to mix pump and E85 without any concerns, as E85 is not readily available everywhere here in CA. It seems we really need a 3D map like Haltech has employed with the Pro ECUs.
I'd have no issues adding a flex fuel sensor should the software become available to support the ECU switching automatically as it sees input from the flex sensor. I'd love to be able to mix pump and E85 without any concerns, as E85 is not readily available everywhere here in CA. It seems we really need a 3D map like Haltech has employed with the Pro ECUs.
Thread
Thread Starter
Forum
Replies
Last Post
Tochigi_236
Feedback & Suggestions for Our Forum
8
09-27-2015 03:40 PM