ss clutch line... might as well get it with it or no?

http://conceptzperformance.com/Cart/...276.187.102.26

jake, if you look at the video, it looks like the bolt is broken, i show it off for a couple secs. around the 7-8 sec mark in the video. isnt that nut where the ball should be connected? looks broken.

 

^^yes - get it..

 

Ya Emad, it looks like it sheared off. That round part of the pivot ball sits in and pivots in that arm. It looks like it is stuck in that arm and sheared off. At least it's not an expensive fix lol assuming that's all it is.

 

it's not hard to fix, besides the whole taking the tranny out thing. can anyone help me fix it this weekend by any chance? I have tall jack stands...

jake said he can, but not sure exactly when... i just wanna get back on the road with it if anyone can help soon. thanks homies!

 

I would let you do it at my place Emad....but don't know how you'd get the G to my place.

 

I can help for a bit on saturday or Sunday whenever I get over my hangover lol. I gotta go to my buddies birthday party staurday night but not sure what time. If you need the help just let me know when and where.

 

i just dont have the equipment. not sure what i need to pull down the tranny at all.

 

Chris and/or Jake have you covered in the power tool department and I've got a transmission jack that goes low enough to use even with the car on tall jack stands. For the most part it's just an assortment of sockets and wrenches, all metric of course. I did mine with no power tools but it was a bietch, not impossible though. Also extensions of different lengths are a must. I have all of that covered but if Jake or chris help you, I'm sure they have it as well. I know Jake does for sure.

 

Also gonna need a bolt extractor to get what's left of the pivot ball out of the transmission.

 

just a regular jack homey.. real question is how high you got your car.?. if you just used a HF jack, I can tell you right now its not high enough..

Just a 17mm, 10mm to move some brackets out of the way...some diff length exts for sure.. Driveshaft should already be out (4x17MM).. 12mm and a 14mm iirc..

I still need to get my clutch in and need an extra hand myself. Emad - if you help me, I will return the favor sir.. Stabbing the tranny (<--LOL) is no one man job..

Should be a 19 or 21MM..If its broke where I think it is - we wont need an extractor..

 

jake i'll help you all you want. just let me know time and place... just txt me. you know i like learning.

 

Sorry for sounding like a dumbass too...

 

ok holmes - Im going to try to handle it thursday...if I cannot get it I will need your help this wkend.. Im going to buy a tool to assist with the flywheel not turning while I torque it..

 

i cant help on saturday due to xdc, but sun i'm free.

 

Jake that sounded cool...I'm sure it sounded way better in person.

Hey if your gonna work on Emad's G thursday maybe I'll swing by and pick up my Diff.....btw did Scott ever get that antenae amp ?

 

I got alot of school work this weekend... But I will swing by so we put that tranny in.... Jake, I'm getting that exhaust after all, probably Friday after work. You think you could go with me? He is willing to meet half way

 

Anybody want to go it halfsies on these with me ??? Seems like a good deal.

http://dallas.craigslist.org/ftw/tls/2609924807.html

Jake, Shawn, Scott, Pat, Emad, Damon ????

I only want a set of jack stands and one of the Hydraulic jacks.

 

Nope he did not sir...that will be fine if you stop by - I should be home bud..

You know it buddy - just keep me posted...I still have your Y in my truck..lol

 

Chris - Im good - I barely have enough room for what I have now...lol

LMAO @ dont BS me!

 

Sup guys, I have been a little quite in here lately. Worked on the Z all weekend and finally got it started on my birthday. Nice present the Z gave me haha. So now just have to get her tuned and she'll be ready to go.

3 days till the move!!!