Technosquare Dealer in Florida?
Don't want to speak out of my rear, but I think we're stuck
mailing the ECU to AAM or TS. I've beaten this horse for a
few months, and decided to eventually go with an FCon.
Once you run down all costs - a tuning solution with more
"flexibility" seemed like a better idea. If you're in Sofla try
Japtrix, talk to Roger and buy a Utec (gasp) or Fcon
---- OPINION ONLY.
mailing the ECU to AAM or TS. I've beaten this horse for a
few months, and decided to eventually go with an FCon.
Once you run down all costs - a tuning solution with more
"flexibility" seemed like a better idea. If you're in Sofla try
Japtrix, talk to Roger and buy a Utec (gasp) or Fcon
---- OPINION ONLY.
The UTEC is a piggyback onto your factory ECU. You can do a search in the tuning or FI section for more info. Performance Factory has gotten the Halltech working with HR motor's now. It's what they used in the HR TT motor. Little overkill for NA though. Your stuck shipping to AAM or Technosquare for a mail order tune if you don't wanna go that route. Not sure if the Osiris is working with HR's, COULD be an option but i don't know much about it @ all.
I appreciate the information. After fighting off 12k miles on my 07, I have finally been bitten by the mod-bug. Intakes, exhaust, tune, gears, lsd, flywheel, I have all these ideas flowing, ahhh. Must not spend money on car...
Originally Posted by pistols07Z
I appreciate the information. After fighting off 12k miles on my 07, I have finally been bitten by the mod-bug. Intakes, exhaust, tune, gears, lsd, flywheel, I have all these ideas flowing, ahhh. Must not spend money on car...
Originally Posted by ZU L8R
Then I suggest you stay off this site

Trending Topics
Pistols... Whats your 20? Are you close to Riviera Beach
(West Palm Area)? If so, just make your way over to Japtrix,
Roger will give you a great walk through on upgrades similar to
what you are interested in. You should really plan your expenditures
cause you never know if you're gonna go FI, and certain
NA upgrades just don't work well with FI setups. There are
many happy customers from Japtrix, and many NICE Zs and
other cars that they have built from the ground up. Right now
there are two monster turbo builds going on. Check them out,
you will be very happy you did. They have sick prices on labor
and parts too.
(West Palm Area)? If so, just make your way over to Japtrix,
Roger will give you a great walk through on upgrades similar to
what you are interested in. You should really plan your expenditures
cause you never know if you're gonna go FI, and certain
NA upgrades just don't work well with FI setups. There are
many happy customers from Japtrix, and many NICE Zs and
other cars that they have built from the ground up. Right now
there are two monster turbo builds going on. Check them out,
you will be very happy you did. They have sick prices on labor
and parts too.
I was told from my buddy that has a Vq35 swap 4th gen RMT to go to Twilight Performance in Miami , They can also tune the UTEC for the 350z guys , Gs as well ...
http://local.yahoo.com/details?id=14...cb=2i3YE42E4Qf
Here is the direction and # for South Florida guys..
Altho Ive been hearing Rogers name pop up from Japtrix but pretty far drive for me.
I will find out if Gary at Speed Injected in Hallandale does any work with the UTECs
http://local.yahoo.com/details?id=14...cb=2i3YE42E4Qf
Here is the direction and # for South Florida guys..
Altho Ive been hearing Rogers name pop up from Japtrix but pretty far drive for me.
I will find out if Gary at Speed Injected in Hallandale does any work with the UTECs
Originally Posted by pistols07Z
I appreciate the information. After fighting off 12k miles on my 07, I have finally been bitten by the mod-bug. Intakes, exhaust, tune, gears, lsd, flywheel, I have all these ideas flowing, ahhh. Must not spend money on car...
and youll get a Haltech
Thread
Thread Starter
Forum
Replies
Last Post





