Notices
Wheels & Tires 350Z Rollers and Rubbers

Unofficial Enkei Wheels Thread

Thread Tools
 
Search this Thread
 
Old 07-25-2011, 11:48 AM
  #981  
scotts300
350Z-holic
iTrader: (46)
 
scotts300's Avatar
 
Join Date: Aug 2003
Location: Away
Posts: 8,193
Received 7 Likes on 6 Posts
Default

Originally Posted by ericjackson
i was told the wheels are +15. the spacer is not much. like 5mm or so. it just needed room for the inside of tires to clear. I need to take a look at the wheels when i take them off to be sure though since i just bought them and test fitted this weekend.
To clear what? If they are 9.5 +15, they should clear without a spacer. I run that size with a 285/35, as well as a 285 on 10.5 +15.
Old 07-25-2011, 12:02 PM
  #982  
ericjackson
New Member
iTrader: (2)
 
ericjackson's Avatar
 
Join Date: Sep 2005
Location: memphis tn
Posts: 1,255
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by scotts300
To clear what? If they are 9.5 +15, they should clear without a spacer. I run that size with a 285/35, as well as a 285 on 10.5 +15.
well im not sure, the guy i bought them from, said the fronts wouldnt clear the inside with the 285's so he gave me his spacers that he had to use. wish i would have known that before i installed longer studs this weekend...
Old 07-25-2011, 12:08 PM
  #983  
03threefiftyz
350Z-holic
iTrader: (25)
 
03threefiftyz's Avatar
 
Join Date: Aug 2007
Location: Frederick, MD
Posts: 9,848
Received 118 Likes on 63 Posts
Default

It's all fun until you have to replace the 19" A6....the 18's are pricey enough!
Old 07-25-2011, 12:22 PM
  #984  
ericjackson
New Member
iTrader: (2)
 
ericjackson's Avatar
 
Join Date: Sep 2005
Location: memphis tn
Posts: 1,255
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 03threefiftyz
It's all fun until you have to replace the 19" A6....the 18's are pricey enough!
haha you arent lying. Luckily the rears only have 2 races on them. And i have 6 extra v710's for the front. All this wheels/tires for $600. I couldnt beat it.
Old 07-26-2011, 10:34 AM
  #985  
SE5spd
Registered User
iTrader: (17)
 
SE5spd's Avatar
 
Join Date: Jul 2009
Location: around
Posts: 4,114
Likes: 0
Received 0 Likes on 0 Posts
Default

Anyone know what the biggest you can stick on a 9.5 RPF1 is?
Old 07-26-2011, 10:37 AM
  #986  
AdvanZ33
Senior Super Moderator
MY350Z.COM
iTrader: (105)
 
AdvanZ33's Avatar
 
Join Date: Jan 2009
Location: Eastern NC
Posts: 7,287
Received 189 Likes on 102 Posts
Default

Originally Posted by SE5spd
Anyone know what the biggest you can stick on a 9.5 RPF1 is?
You mean widest? Are you lowered? Offset? Front or rear?
Old 07-26-2011, 11:09 AM
  #987  
scotts300
350Z-holic
iTrader: (46)
 
scotts300's Avatar
 
Join Date: Aug 2003
Location: Away
Posts: 8,193
Received 7 Likes on 6 Posts
Default

Originally Posted by SE5spd
Anyone know what the biggest you can stick on a 9.5 RPF1 is?
Which offset are they? Regardless, 275/40/17 is the biggest I'd put on it
Old 07-26-2011, 11:38 AM
  #988  
Zazz93
New Member
iTrader: (2)
 
Zazz93's Avatar
 
Join Date: Jul 2009
Location: So Cal
Posts: 1,769
Received 8 Likes on 6 Posts
Default

I've seen a guy track a 9.5 +20 with 285/30 on the front and 10.0 +22 with 295/30 in the rear on a Z, but I limit my 9.5's to 275's.
Old 07-26-2011, 11:40 AM
  #989  
03threefiftyz
350Z-holic
iTrader: (25)
 
03threefiftyz's Avatar
 
Join Date: Aug 2007
Location: Frederick, MD
Posts: 9,848
Received 118 Likes on 63 Posts
Default

265 would probably be best, but 275 would work too.
Old 07-26-2011, 11:53 AM
  #990  
Kirbaaybaayy
Registered User
iTrader: (1)
 
Kirbaaybaayy's Avatar
 
Join Date: Aug 2009
Location: Houston, Tx
Posts: 883
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 03threefiftyz
265 would probably be best, but 275 would work too.
for tracking 265 would be better not to small or to wide
Old 07-26-2011, 01:18 PM
  #991  
scotts300
350Z-holic
iTrader: (46)
 
scotts300's Avatar
 
Join Date: Aug 2003
Location: Away
Posts: 8,193
Received 7 Likes on 6 Posts
Default

Originally Posted by Zazz93
I've seen a guy track a 9.5 +20 with 285/30 on the front and 10.0 +22 with 295/30 in the rear on a Z, but I limit my 9.5's to 275's.
He is looking at 17" RPF1s.

Originally Posted by 03threefiftyz
265 would probably be best, but 275 would work too.
Originally Posted by Kirbaaybaayy
for tracking 265 would be better not to small or to wide
I have only seen the Dunlop Star Spec in 265/40/17, which of course works. I ran 275/40/17s on 9s forever, then (wide Hoosier 275/40/17s) on 17x10 FN01R-Cs.
Old 07-26-2011, 09:41 PM
  #992  
SE5spd
Registered User
iTrader: (17)
 
SE5spd's Avatar
 
Join Date: Jul 2009
Location: around
Posts: 4,114
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by scotts300
Which offset are they? Regardless, 275/40/17 is the biggest I'd put on it
Oh I'm talking about my 18x9.5 +15 front

The 17x9.5 +18 ones I'm getting I'm putting 255/40/17 RS3s on cause they cost $125.00 a tire
Old 07-27-2011, 06:35 AM
  #993  
scotts300
350Z-holic
iTrader: (46)
 
scotts300's Avatar
 
Join Date: Aug 2003
Location: Away
Posts: 8,193
Received 7 Likes on 6 Posts
Default

Originally Posted by SE5spd
Oh I'm talking about my 18x9.5 +15 front

The 17x9.5 +18 ones I'm getting I'm putting 255/40/17 RS3s on cause they cost $125.00 a tire
Well don't you already have 265 RS3s on that 9.5 +15 front? You can fit larger (275 or 285), but the consensus is that the RS3s like a little stretch, so that 265 is perfect. Why would you change it up at this point?
Old 07-27-2011, 07:55 AM
  #994  
03threefiftyz
350Z-holic
iTrader: (25)
 
03threefiftyz's Avatar
 
Join Date: Aug 2007
Location: Frederick, MD
Posts: 9,848
Received 118 Likes on 63 Posts
Default

Agree, I would stick with the 265 on the 9.5" with the RS3's....even a 255.
Old 07-27-2011, 08:38 AM
  #995  
SE5spd
Registered User
iTrader: (17)
 
SE5spd's Avatar
 
Join Date: Jul 2009
Location: around
Posts: 4,114
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by scotts300
Well don't you already have 265 RS3s on that 9.5 +15 front? You can fit larger (275 or 285), but the consensus is that the RS3s like a little stretch, so that 265 is perfect. Why would you change it up at this point?
I'm potentally just gonna sell my 18in RPF1s and buy the 17s and put some spacers back on. My friend I've been talking to wanted to know whether he could fit 275/285 combo or even just a 285 square on a 9.5/10.5.

I didn't know the answer so that's why I'm asking.
Old 07-31-2011, 02:57 PM
  #996  
flynbrin
New Member
iTrader: (29)
 
flynbrin's Avatar
 
Join Date: Sep 2004
Location: Fullerton
Posts: 1,767
Likes: 0
Received 0 Likes on 0 Posts
Default

18X9.5 +15 with 15mm spacer= +0

18X10.5 +15 with 15mm spacer= +0

265/35/18 front

265/40/18 rear






Last edited by flynbrin; 07-31-2011 at 02:58 PM.
Old 07-31-2011, 03:02 PM
  #997  
ChriZTT
New Member
iTrader: (16)
 
ChriZTT's Avatar
 
Join Date: Aug 2005
Location: South Florida
Posts: 490
Received 11 Likes on 8 Posts
Default

Sweet set up! Thanks for the specs. Any idea what your alignment specs are? Thanks.
Old 08-01-2011, 12:04 AM
  #998  
flynbrin
New Member
iTrader: (29)
 
flynbrin's Avatar
 
Join Date: Sep 2004
Location: Fullerton
Posts: 1,767
Likes: 0
Received 0 Likes on 0 Posts
Default

lowered on stance with stock alignment specs

hope that helps
Old 08-01-2011, 02:07 PM
  #999  
lazyduster
Registered User
iTrader: (6)
 
lazyduster's Avatar
 
Join Date: Jan 2008
Location: New Jersey
Posts: 101
Likes: 0
Received 0 Likes on 0 Posts
Default

Name:  96226c62.jpg
Views: 359
Size:  74.2 KB
Old 08-01-2011, 06:36 PM
  #1000  
Kirbaaybaayy
Registered User
iTrader: (1)
 
Kirbaaybaayy's Avatar
 
Join Date: Aug 2009
Location: Houston, Tx
Posts: 883
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by lazyduster
mmmm more please!


Quick Reply: Unofficial Enkei Wheels Thread



All times are GMT -8. The time now is 09:35 PM.