Wiring problems with 350z audio
#1
Registered User
Thread Starter
Join Date: May 2018
Location: Corona, California
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Wiring problems with 350z audio
So this weekend I went ahead and bought a new stereo for my 350, the pioneer avh-x390bs, went ahead and began taking apart the old radio. The previous person did some lame wiring job and all the wires were coming off(Had some wires peeled with nothing to protect it with). So I went ahead and started to redo the wiring job and after getting all done, I plug in the radio and get no power to my radio. I followed this guide https://my350z.com/forum/audio-and-v...-for-350z.html to rewire the harness as again the previous owner sliced and diced it all up. Did I **** up wiring somewhere? I do have an extra wire that I have no idea what it does, Red wire with a yellow stripe on it. Any help would be appreciated! would like to do this on my own but if I have to ill take it to a shop to get it done.
#2
New Member
That guide is like 12 years old - Lots of things have changed with regards to head units.
Look at AnthonyJ350’s YouTube videos for all sorts of install/wiring guides and tips.
Look at AnthonyJ350’s YouTube videos for all sorts of install/wiring guides and tips.
Thread
Thread Starter
Forum
Replies
Last Post
Wiring_Specialties
Engine
1
08-07-2020 04:12 PM