myz8a4re

iTrader: (2)

thats correct, one module=both windows roll up.......

-justin

cyclopz

I recieved both mod units yesterday and installed both today. No problems at all!! Both are working perfectly. For the TCS mod I picked a wire off the brake switch at the pedal for the 12v ignition wire, it only gets current with the ignition in the on position. Does anyone forsee a problem with using that wire? It was soo easy to tap into and right behind the TCS switch.

Thanks Kevin great mods and easy install

KPierson

iTrader: (1)

Glad you like them. I'll look into the brake wire, but it shouldn't be a problem. These modules draw such a small amount of current that as long as everything is working right you should be able to get power for them anywhere in the car, as long as its 12vdc.

Thanks,
Kevin Pierson
www.KPtechnologies.net
AIM: KPiersonTec

ZRACING

can u check ur PM

thanx

sflg35

iTrader: (8)

bump

hows everyone doing? anyone still havin problems.

kevin should have somemore ready to go in a few weeks

sal1

Kevin, I have something weird or should I say unusual. I unlock the doors with my FOB and about 60 seconds later the doors lock automatically. What's happening? Sal

DavesZ#3

iTrader: (26)

Mine does that and I don't have Kevin's unit. If you unlock the door but don't actually open it, they will relock themselves. See page 3-5 of the owners manual - the section on "HOW TO USE REMOTE KEYLESS ENTRY SYSTEM".

KPierson

iTrader: (1)

Yep, that is normal. All of the Zs and Gs do that. After you hit the unlock button you have 60 seconds until the doors relock. I guess this is in case you accidently unlock the car without knowing, or if you unlock it and then run back inside and forget to come back.

Kevin
www.KPtechnologies.net

sal1

Thanks for your reply. I guess I never read that.