Notices
Engine & Drivetrain VQ Power and Delivery

Replacing 05 VQ with 07 VQ?

Thread Tools
 
Search this Thread
 
Old Apr 18, 2010 | 10:08 AM
  #1  
giftedone's Avatar
giftedone
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 6
Likes: 0
From: Casa Grande, Arizona
Default Replacing 05 VQ with 07 VQ?

Has anyone done this? I found a really good deal on one, and it would be nice to know if it would be a HUGE hassle to do. I know that the 07 is very different then the 05 so I'm expecting that it just won't work. Both are 6mt, and the new motor comes with its 6mt.

Thanks!
Robert
Reply
Old Apr 18, 2010 | 10:37 AM
  #2  
Z1 Performance's Avatar
Z1 Performance
Former Sponsor
iTrader: (564)
 
Joined: Feb 2003
Posts: 19,266
Likes: 5
From: Long Island, New York
Default

Huge hassle would be an understatement

best thing is to sell yours and buy an 07 up if that is the engine you want
Reply
Old Apr 18, 2010 | 12:08 PM
  #3  
giftedone's Avatar
giftedone
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 6
Likes: 0
From: Casa Grande, Arizona
Default

Hmm... thats too bad. I was just thinking since it was cheap I would pick it up as a backup in case mine goes and I could also build it a little at a time so that it doesn't interrupt my daily driving.

Thanks for the reply!
Reply
Old Apr 18, 2010 | 04:58 PM
  #4  
bswanny's Avatar
bswanny
Registered User
iTrader: (4)
 
Joined: Apr 2004
Posts: 420
Likes: 0
From: Wisconsin
Default

Is it the wiring and electronics that is the hassle or just physical modification to fit in the engine bay? Thanks for any help
Reply
Old Apr 18, 2010 | 06:10 PM
  #5  
Z1 Performance's Avatar
Z1 Performance
Former Sponsor
iTrader: (564)
 
Joined: Feb 2003
Posts: 19,266
Likes: 5
From: Long Island, New York
Default

A combination of both
Reply
Old Apr 19, 2010 | 03:57 AM
  #6  
Quamen's Avatar
Quamen
Registered User
iTrader: (14)
 
Joined: Aug 2005
Posts: 3,383
Likes: 2
From: Wisconsin
Default

This forum is getting worse every day. Mods you need to make a 50 post minimum in order to start a thread like most other forums do...
Reply
Old Apr 19, 2010 | 05:49 AM
  #7  
louie12345's Avatar
louie12345
Registered User
iTrader: (14)
 
Joined: Aug 2009
Posts: 47
Likes: 0
From: Florida
Default

Go to the link below and read all about it. fill in the blank on the link. fitting the engine in your 05 is a minor problem, but making the 07 ecu to work with your 05 electronic is a major pain in the backside. It has been done before, and currently there is guy putting the VQ35HR into his FX35 that had the DE engine.

http://forums.nic****b.com/vq-engine...463001-40.html
Reply
Old Apr 19, 2010 | 07:30 AM
  #8  
giftedone's Avatar
giftedone
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 6
Likes: 0
From: Casa Grande, Arizona
Default

Thanks guys for the replies, except for quaman. Really man? It's a valid question to an actual problem, I stated that there are drastic differences between the 2 motors so I was expecting it not to work. What's the harm in asking a place that has a pool of knowledge like this one, oh I know! Douchebags like you.

Thanks again everyone.
Reply
Old Apr 19, 2010 | 07:54 AM
  #9  
Quamen's Avatar
Quamen
Registered User
iTrader: (14)
 
Joined: Aug 2005
Posts: 3,383
Likes: 2
From: Wisconsin
Default

Originally Posted by giftedone
Thanks guys for the replies, except for quaman. Really man? It's a valid question to an actual problem, I stated that there are drastic differences between the 2 motors so I was expecting it not to work. What's the harm in asking a place that has a pool of knowledge like this one, oh I know! Douchebags like you.

Thanks again everyone.
I completely agree that your question is a valid question. No disagreement there. However, it has been asked time and time again. Like you said this is a pool of knowledge and there is plenty of information on this swap, you just need to search for it.
Reply
Old Apr 19, 2010 | 07:59 AM
  #10  
Quamen's Avatar
Quamen
Registered User
iTrader: (14)
 
Joined: Aug 2005
Posts: 3,383
Likes: 2
From: Wisconsin
Default

https://my350z.com/forum/vq35hr/3740...o-an-03-a.html
https://my350z.com/forum/vq35hr/4748...-question.html
https://my350z.com/forum/engine-and-...-or-go-sr.html
https://my350z.com/forum/shop-builds...-autobahn.html
https://my350z.com/forum/vq35hr/4067...-progress.html
https://my350z.com/forum/engine-and-...e-in-03-a.html
https://my350z.com/forum/vq35hr/3223...o-an-04-z.html
https://my350z.com/forum/vq35hr/2997...7vhr-swap.html
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
XM 1
Engine & Drivetrain
29
Jul 10, 2022 07:44 AM
Colombo
Forced Induction
35
Nov 9, 2020 10:27 AM
Rev_Night
Wheels & Tires
30
Nov 7, 2020 06:00 PM
350z82
Exterior & Interior
19
Oct 1, 2015 06:25 PM
pr_350z
Maintenance & Repair
2
Oct 1, 2015 05:03 PM




All times are GMT -8. The time now is 02:25 PM.