Roadster Passenger Seat Swap
#1
New Member
Thread Starter
Join Date: Aug 2022
Location: Chicago
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Roadster Passenger Seat Swap
I am putting roadster seats out of a 2007 into a 2004 coupe. The passenger side seat has power recline for the back, and the coupe, of course, originally did not have this feature. I want to wire it so it works. I have read on this forum about other people doing this successfully but don't know what wires were spliced. Can anyone help? Thanks
#5
New Member
iTrader: (2)
Just to clarify, you're taking a power seat out of a 2007 ZR and putting it into a 2004 coupe that has a manual seat?
Usually, people have questions about swapping in aftermarket or coupe seats into the roadster. Here's a write-up about a manual to power seat conversion.
https://my350z.com/forum/body-interi...seat-swap.html
And attached is the seat section from the FSM. Good luck!
Usually, people have questions about swapping in aftermarket or coupe seats into the roadster. Here's a write-up about a manual to power seat conversion.
https://my350z.com/forum/body-interi...seat-swap.html
And attached is the seat section from the FSM. Good luck!
#6
New Member
Thread Starter
Join Date: Aug 2022
Location: Chicago
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
The 2004 coupe has power seats, just not the power passenger back recline like the roadster does. I'm trying to get that to work. I guess all coupes only had the manual release lever. Thanks for the info, that helps a lot, I think with the FSM pages I can figure out how to wire it.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mr2blackna
350Z Roadster
3
03-24-2012 11:54 AM