XBS

iTrader: (29)

Found this forum with some more info on the E-Manage ultimate, this person is testing it on an IS300

http://www.transonicracinginnovation...opic.php?t=217

there is also a new forums for the e-manage that will hopefully become a good resource

http://emanageforums.com/

Sharif@Forged

iTrader: (92)

HI Jonathan, you will just need one pressure sensor (which ones with a harness), and one "extra" pressure sensor harness, so we can wire up your wideband A/F to the EU.


Sounds good?

Jason kiDD

Peeking in, NA for now so waiting on timing information.

Sharif@Forged

iTrader: (92)

Jonathan, I made one error in my statement. The emanage pressure sensor does not come with a harness. So yes, you will need the pressure sensor, and then TWO pressure sensor harnesses. One for pressure, and one from wideband A/F

Peking

iTrader: (2)

Ok, and so I would include what you just said in the comments section right? And you will remember to include them so we will be good to go for the install

Sharif@Forged

iTrader: (92)

That is correct.....

Peking

iTrader: (2)

Sharif I just registered on your site, and placed my order... But the weather here right now is really bad, and right when I submitted my order the power went out and knocked out my modem... So posting this quickly before it happens again.

Is it possible to check if my order went through? If not I will try again later or tomorrow, don't want to charge my credit multiple times lol.

Sharif@Forged

iTrader: (92)

Just checked, and the order didnt go through.

I always manually run the cards, so you never have to fear getting charged twice.

Go ahead and order it again...

Badmonkey

iTrader: (9)

Anything ship, yet?

overZealous1

iTrader: (27)

trying to locate a way to hook up the speed cut controller. it seems it uses many sensors to achieve the info, from wheel sensor to throttle pedal. the wheel sensors come in from the can system. not sure if there is just a single wire to hook to that controls this function. if it just controls fuel it may be taking in multiple readings and controlling it inside the ecu. will investigate more though.

Sharif@Forged

iTrader: (92)

They just arrived today! Lots of EU's and harnesses all over the office!

I'll get many shipments out Friday....the rest next week. Still waiting on some pressure harnesses for everyone..which I should have by Friday or Monday.

Peking

iTrader: (2)

Alright folk, will do before lunch today at work

Peking

iTrader: (2)

Ok Sharif, I ordered mine

Sharif@Forged

iTrader: (92)

Thank you...looks like just about all the orders willl ship by Monday. I shipping several today. I couple might trickle into Tues, as I am waiting on the last batch of AutoSport harnesses.

Thanks everyone!

Peking

iTrader: (2)

Noice, also reading a little on the A/F thingy... So will it connect to my A/F gauge or the A/F sniffer on the dyno when you tune?

Oh it mentioned itwill have USB, so I can data log on my laptop right?

Sharif@Forged

iTrader: (92)

It will connect to your wideband A/F gauge with the extra pressure sensor harness I will be sending you.

THe extra pressure sensor harnesses can be cut, and then used to input the wideband A/F from your gauge.

Hydrazine

iTrader: (53)

Sharif,

I sure hope you can get the timing advance results back from Greddy soon. I'm itching to slam this EU onto my car and do some real experimentation!

Sharif@Forged

iTrader: (92)

Just got off the phone with Greddy. The programmers are still working on it. I would expect something within 2 weeks.

Thanks for being patient Tony. I know a lot of people are interested in seeing real time timing displays, and the ability to advance timing. It's coming soon.

Zexy

iTrader: (55)

So nice to hear ^

IceY2K1Max

iTrader: (1)

Somebody w/o a TS ECU please verify the extended limiter.

Unless you feel comfortable about bumping it to 7200rpm Sharif?