Threads

iTrader: (13)

Thanks.

Trust me. That motor, stock at least, will never see 16psi ever again. I guess after all that waiting, I got a little carried away.

Thanks as well. I'll try to hurry up and get this thing on the dyno. I know a lot of people have been curious about this setup.

str8dum1

iTrader: (11)

16 psi, 100 psi who cares. if you car is not making 400wtrq regardless of psi , you are relatively safe.

I ran my stock block vortech at 17-18psi for almost 2 years, issue free. I was only making 405wtrq though.

Threads

iTrader: (13)

Just got my rims and tires in. However, I'll be exchanging my bias-plys for drag radials since I didn't realize the dangers of mixing bias-ply and radials.



Installed the new intercooler today. If someone can weld the boost limiter valve flange onto my charge piping, I should have the BLV installed tomorrow.



If my work schedule works out, I should be hitting the dyno late next week!

Classy

iTrader: (7)

How much bigger is that one over the one that comes with the kit?

unvmyg35

iTrader: (15)

4" wider so you need to cut the piping by 2" on each side.

T4RUSAF

iTrader: (2)

Threads,

Who's tuning your setup? I'm somewhat local and would like to see who you are using so I can get my setup tuned from them as well. thanks!

Threads

iTrader: (13)

Correct!

Corr Performance tuned my first setup if you couldn't tell by the dyno sheet. They'll be tuning my current setup as well.



Quick Update: It seems nothing wants to go smoothly on this project. While trying to install the BLV, the "welder" seized the valve in the bung TWICE, and now I'm forced to get a new intercooler pipe. Needless to say, i'm getting someone else to install the valve, and I'm trying to get the welder to pay for the "damages" done. However, I'm just getting the runaround. I'm just ready to get this thing on the dyno....

str8dum1

iTrader: (11)

why are you even messing with a BLV? are you making >400wheel torque on your stock block?

Threads

iTrader: (13)

You make a valid point str8dum. I should get dyno'd first to see what the car makes before adding the BLV. I assumed that I was close to that 400wtq number because I was seeing such high boost around redline. However, if I could avoid it, I'd rather not have to make two trips to the dyno if I do get close to 400wtq threshold (w/o the BLV installed).

meanz

iTrader: (23)

Subd to see how this turns out

Threads

iTrader: (13)

Update:

I sent over a datalog of a 3rd gear pull to my tuner before setting up an appointment for this Saturday. To confirm my suspicion, I have out grown my fuel system. I am hitting an unsafe duty cycle percentage around 12psi. My tuner is consulting with some resources to find out exactly what I need to do to remedy the issue. It's looking like I'll need a combo of the following: bigger injectors (thinking around 800cc), DW301 fuel pump, CJM Stage 0.

Hopefully, I'll get some recommendations, get this stuff ordered/installed, and finally get retuned...

T4RUSAF

iTrader: (2)

Any update? I'm a few weeks from taking it to Corr

Threads

iTrader: (13)

I just got the following fuel items installed this past weekend:
* DW 300lph Fuel Pump
* ID 1000cc Injectors
* CJM Stage 0 Kit

I'll probably be going to Corr sometime late next week for a dyno tune. I still need to work out some kinks before I put the car on the dyno.

RB2B

Wow, judging by the injector size, looks like E85 might be in the future?

Threads

iTrader: (13)

Haven't given it any thought. I would like to think my setup should be tunable with just 93 octane.

justboughtaz

iTrader: (1)

The suspense is killing me ... I sent my impeller of to Carl @ 928 as well and awaiting the V+ impeller upgrade for my Sc Trim blower.

My Setup:

5/16 Plenum Spacer
Tomei Headers
Tomei Test Pipes
Tomei 264 10.5 Cams
HKS exhaust eBay Style

Threads

iTrader: (13)

Glad to know someone is as anxious as I am!

I am scheduled to get tuned sometime this week/weekend. Obviously not tonight, since the tuners have wives!

I did some street tuning last night which went rather well. Tuning the 1000cc's with the Haltech turned out to be alot easier than expected. However, I think I came across a small boost leak and/or belt slip around 6000rpms. I replace the first 4 connections around the intercooler with T-Bolt clamps and silicone couplers. I may have induced some user error there. I'll be debugging that tonight in hopes of getting the car ready for a dyno tune tomorrow night.

Your setup looks promising. Can't wait to see what kind of results you get with headers and cams. However, I noticed that you said you had a SC blower. I hope that the 928 impeller fits that SC volute. Carl told me that the impeller was cut specifically for the S trim volute. Good luck!

Threads

iTrader: (13)

Just got back from the dyno tonight. My first run was a very disappointing 343whp@16.1psi. I made approximately that when I got tuned at 9psi. After tuning adjustments by Corr, we were able to get 400whp/367wtq@18psi. We were having issues with my haltech datalog cable above 6400rpms. Because of this, we decided not to get too crazy after 6400rpm. There are still a few horses left to be had on the top end, and I'll be heading back to the dyno once I get a better cable.

Overall, I am a little disappointed with my low numbers. However, I'm glad that my tuner, Corr, was able to squeeze almost 60whp out of with the tune(and a little extra boost). I dyno'd on my heavy 20" rims and FWIW, the dyno dynamics I dyno'd on is about 13% off from a dynojet. The dynojet correction should put me at or about 450whp. I'll be sure to post the graph as soon as I get it.

Even though my numbers were a little low, the car is noticeably faster. Especially comparing the before and after tuning. I think I finally felt my stock clutch slip a little bit.

I'm looking forward to hearing what you guys think.

RB2B

Can we have some charts?

Threads

iTrader: (13)

Of course. Once I get the dyno sheet(s), I'll post them up here.