Recommend mileage for breakin on TT motor
07-22-2011, 05:25 AM
#61
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
I've never known a vq to blow up from average boost levels (not many on here at extreme boost pressures) because or crankcase pressure. That valvecover gasket will go long before it affects the mechanics of the engine. At <20psi i wouldn't even worry about it. I just have breather filters on both of my valve covers.
07-22-2011, 07:03 PM
#62
I've never known a vq to blow up from average boost levels (not many on here at extreme boost pressures) because or crankcase pressure. That valvecover gasket will go long before it affects the mechanics of the engine. At <20psi i wouldn't even worry about it. I just have breather filters on both of my valve covers.
07-24-2011, 08:33 AM
#64
With my old motor I dealt w cc presure and I had a breather on the drivers side and it blew oil every where, all over the engin bay.
07-24-2011, 09:23 AM
#65
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
i run breathers on both of mine.
if you're worried about oil (which i've never had a problem with) then run a hose from the breather to a catch can then put the breather on the catch can.
if you're worried about oil (which i've never had a problem with) then run a hose from the breather to a catch can then put the breather on the catch can.
Thread
Thread Starter
Forum
Replies
Last Post