Vortech running lean. help please
#21
but i guess use it until you can upgrade. I will say that i was using the 2.87 pulley with DW 440 injectors, walbro, and CJM stage 0 return kit with no fueling issues at all if you needed advice on a cheap way to upgrade.
I actually still have the rear-rail adapter for that return kit. I can cut you a deal on it then all you would need is a 6an stainless line for the return, the correction kit, and a FPR and you will be in business.
#22
He used an in tank fmu. Im happy with my car, I don't think I'll ever move to the 2.87.
I took the fmu apart and it looks like it failed due to water getting into the vent on top. There was a lot of rust in the center section that is open to atmosphere
I took the fmu apart and it looks like it failed due to water getting into the vent on top. There was a lot of rust in the center section that is open to atmosphere
Thread
Thread Starter
Forum
Replies
Last Post
Colombo
Forced Induction
35
11-09-2020 10:27 AM
350Z_Al
Exterior & Interior
133
10-29-2020 07:44 PM