OFFICIAL Kinetix post, plenum issues, discussion etc.
#162
Registered User
Join Date: Jan 2003
Location: East Hampton, New York
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Theres an actual mark on the plenum, a blemish of sorts, where it is touching. its peeling away the paint on the inside of the hood. The area is about 1/2 inch circle where its hitting. ill try to get pics but that would take awhile.
Rich
Rich
#165
Registered User
Join Date: May 2004
Location: Parts Unknown
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
Hey Lou. Is there any particular reason that you always have to talk **** about Kinetix? If you are a Crawford guy, why do you always have to stick your nose in a Kinetix post and bash them?
Originally posted by lowrider
ISH
To free up horsepower, you must add noise IMO. However, you have the loudest noisemaker there is right now, the POPCharger. BTW, I have one too.
Yes, I recommend the plenum, preferably the Crawford. You don't want to do anything to your exhaust without first doing Hi-Flow cats, again Crawford. Then maybe Borla TDs, and Crawford headers. By that time, you'll be ready for a TechnoSquare flashed ECU, again use the Crawford Flash.
Lou
ISH
To free up horsepower, you must add noise IMO. However, you have the loudest noisemaker there is right now, the POPCharger. BTW, I have one too.
Yes, I recommend the plenum, preferably the Crawford. You don't want to do anything to your exhaust without first doing Hi-Flow cats, again Crawford. Then maybe Borla TDs, and Crawford headers. By that time, you'll be ready for a TechnoSquare flashed ECU, again use the Crawford Flash.
Lou
#166
New Member
iTrader: (1)
Join Date: Jul 2003
Location: USA
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
Got my V4 to replace V3 and thx Kinetix for the fast shipping. Only thing I dont like about V4 is it doesnt sound as loud and cool as the V3 and V2 I got. I wonder if its because the ECU is not adjusted to the V4 yet.
#167
Registered User
Join Date: Aug 2003
Location: Massillon, OH
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jor8888
Got my V4 to replace V3 and thx Kinetix for the fast shipping. Only thing I dont like about V4 is it doesnt sound as loud and cool as the V3 and V2 I got. I wonder if its because the ECU is not adjusted to the V4 yet.
Got my V4 to replace V3 and thx Kinetix for the fast shipping. Only thing I dont like about V4 is it doesnt sound as loud and cool as the V3 and V2 I got. I wonder if its because the ECU is not adjusted to the V4 yet.
-Chris
#170
Registered User
iTrader: (4)
Join Date: Dec 2003
Location: Annandale, VA
Posts: 1,635
Likes: 0
Received 0 Likes
on
0 Posts
Installed my last weekend sounds real nice especially in the low rpms if any has noticed that...HP gains not very noticeable but when i plant her on the dyno i will see the actual #'s...hopefully tom or sometime this week i should have a dyno # and sheet for you guys...but overall appreciation of this product is very nice...i love the look of my engine bay also...i will throw up a pic later once i get my camera back and working...but overall i like it alot...
Ben
Ben
#172
Registered User
Join Date: Aug 2003
Location: Massillon, OH
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Bahraini350Z
here's a pic of my engine bay
here's a pic of my engine bay
-Chris
Last edited by ChrisMCagle; 08-04-2004 at 08:55 AM.
#173
Registered User
Join Date: Jul 2003
Location: Albuquerque, New Mexico
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ChrisMCagle
Nice! It looks just like my engine bay, but I'd take your engine cover off unless you want a big gouge in the top of it from the hood rubbing against it.
-Chris
Nice! It looks just like my engine bay, but I'd take your engine cover off unless you want a big gouge in the top of it from the hood rubbing against it.
-Chris
#175
Registered User
Originally posted by ChrisMCagle
Nice! It looks just like my engine bay, but I'd take your engine cover off unless you want a big gouge in the top of it from the hood rubbing against it.
-Chris
Nice! It looks just like my engine bay, but I'd take your engine cover off unless you want a big gouge in the top of it from the hood rubbing against it.
-Chris
it's only minor
SungNamz..... I didn't know that our plenum can handle FI!!!
#176
Registered User
iTrader: (1)
Join Date: May 2004
Location: richmond virginia
Posts: 1,121
Likes: 0
Received 0 Likes
on
0 Posts
wow. just as i was about to post about my plenum rubbing away the paint on my hood, i look in here to see that its' not only me. it also rubbed away the paint on my strut bar. is there anyway we could get a refund? i'm just not satisfied and i think i'd rather go with crawford.
edit: i know its the plenum, bc i painted the plenum and the paint on the plenum is also rubbed away.
edit: i know its the plenum, bc i painted the plenum and the paint on the plenum is also rubbed away.
Last edited by jun14scr; 08-04-2004 at 02:21 PM.
#177
Veteran
iTrader: (2)
Originally posted by Bahraini350Z
already have a peice of the paint chipped bcoz of that rubbing
it's only minor
SungNamz..... I didn't know that our plenum can handle FI!!!
already have a peice of the paint chipped bcoz of that rubbing
it's only minor
SungNamz..... I didn't know that our plenum can handle FI!!!
#178
Registered User
Join Date: Aug 2003
Location: Massillon, OH
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jun14scr
wow. just as i was about to post about my plenum rubbing away the paint on my hood, i look in here to see that its' not only me. it also rubbed away the paint on my strut bar. is there anyway we could get a refund? i'm just not satisfied and i think i'd rather go with crawford.
edit: i know its the plenum, bc i painted the plenum and the paint on the plenum is also rubbed away.
wow. just as i was about to post about my plenum rubbing away the paint on my hood, i look in here to see that its' not only me. it also rubbed away the paint on my strut bar. is there anyway we could get a refund? i'm just not satisfied and i think i'd rather go with crawford.
edit: i know its the plenum, bc i painted the plenum and the paint on the plenum is also rubbed away.
The paint on the Plenum got rubbed off by the hood??
#179
Registered User
Join Date: Aug 2003
Location: Massillon, OH
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ares
correct me if Im wrong, but I see 2 bolts, meaning v3 or earlier, not v4. with no support in the middle, I would think v4 would blow up under pressure; or at very least, flex like hell.
correct me if Im wrong, but I see 2 bolts, meaning v3 or earlier, not v4. with no support in the middle, I would think v4 would blow up under pressure; or at very least, flex like hell.
When (if) they release the aluminum version, that will be another story.
SungNamZ, I'd seriously take off the KINETIX plenum and put on your stocker instead. I've heard that with F/I the plenum doesn't really add much anyway.
-Chris
#180
Okay, I have been waiting a very long time for this and I am looking to find some answers....
Kinetx, Is there any timeframe you can provide as to when you think the aluminum plenum will be available? I have been waiting a very long time for any information and all I hear is that you are working on it. I am probably just one of many people that have already asked this question but now it is starting to come down to the wire. I have an engine build coming up soon within a month or so and I would really like to have this plenum.
Can you provide any insight at all?
Thank you.
Kinetx, Is there any timeframe you can provide as to when you think the aluminum plenum will be available? I have been waiting a very long time for any information and all I hear is that you are working on it. I am probably just one of many people that have already asked this question but now it is starting to come down to the wire. I have an engine build coming up soon within a month or so and I would really like to have this plenum.
Can you provide any insight at all?
Thank you.