VDC off and slip light are stuck on
these two light are stuck on but everything seems to be operating just fine i have no clue what the problem is they just turned on this morning. I did a search a fell up short of any kind of answer need help asap don't even know if i should be driving the car.
Last edited by 350Zsmokinyou; Aug 18, 2008 at 07:22 AM.
Originally Posted by 350Zsmokinyou
these two light are stuck on but everything seems to be operating just fine i have no clue what the problem is they just turned on this morning. I did a search a fell up short of any kind of answer need help asap don't even know if i should be driving the car.
Check:
Battery voltage
alternator charge.
all ground connections.
ABS connections/unit possibly doesn't work??
Fuse
reset/check BCM "body control module"
Check for loose connections
Originally Posted by 350Zsmokinyou
these two light are stuck on but everything seems to be operating just fine i have no clue what the problem is they just turned on this morning. I did a search a fell up short of any kind of answer need help asap don't even know if i should be driving the car.
Trending Topics
Originally Posted by Silverstone-Z
If your rear wheels are spinning and your front wheels turn backwards (losing control, drifting and losing it, etc) it will set it off like that.
well no drifting was going on and my tire pressure is ok on all fours. i can drive feels normal and when you get it up to about 4k the lights just turn on. but nothing actually happens. but i honestly dont know about the codes where do i get codes from? there is no abs light.
I had the same thing happen. My "check engine soon" light went on first, then the "vdc off" and "slip" light came on. I kept driving at a track event regardless with no consequences. When my codes were checked, it showed I had a misfire in #5 cylinder. My shop reset the "check engine soon" code and all lights went off and have stayed off so far.
Thread
Thread Starter
Forum
Replies
Last Post






