Notices
Maintenance & Repair 350Z up keep and diagnosing/fixing problems

Squeaking sound after repairs

Thread Tools
 
Search this Thread
 
Old 02-18-2016, 12:31 PM
  #1  
dragoonkane
Registered User
Thread Starter
 
dragoonkane's Avatar
 
Join Date: Feb 2016
Location: Tucson
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default Squeaking sound after repairs

i have this squeak sound on my passenger side of the car. if i lift up or push down on that side of the car i get the sound it is almost continuous when i drive. i didn't go in to the shop with the sound it was only after they replaced the lower control arms,struts and strut mounts no sound but they ruined my old struts so i went back they replaced it with new struts that started the sound then i took it back they replaced the struts a 2nd time i didn't have the sound at first but after about 10 minutes of driving it came back then went away for like 2 hours and then came back again



this is a link of the sound with me just lifting up on the fender
Old 02-18-2016, 05:05 PM
  #2  
travlee
Master
iTrader: (8)
 
travlee's Avatar
 
Join Date: Jul 2011
Location: Texas
Posts: 48,613
Received 9,049 Likes on 6,515 Posts
Default

sounds like my bed
Old 02-18-2016, 09:15 PM
  #3  
jtbinvalrico
Registered User
 
jtbinvalrico's Avatar
 
Join Date: Sep 2012
Location: Tampa, FL
Posts: 245
Likes: 0
Received 0 Likes on 0 Posts
Default

Check the bolts securing top of the strut on the passenger side......check the bolts securing that strut bar too.
Old 02-19-2016, 02:40 AM
  #4  
dcains
Registered User
iTrader: (15)
 
dcains's Avatar
 
Join Date: Aug 2009
Location: Lutz, FL
Posts: 5,126
Received 435 Likes on 342 Posts
Default

Aftermarket swaybar? I finally switched my front Hotchkis for a Nismo bar after trying every type of grease available and two sets of bushings. Yours sounds more like metal on metal, though.
Old 02-19-2016, 08:34 AM
  #5  
RWDBajan
Registered User
 
RWDBajan's Avatar
 
Join Date: Aug 2015
Location: Barbados
Posts: 180
Received 18 Likes on 18 Posts
Default

Does the spring on that corner still have the plastic insulator at the bottom, between it and the strut?
Old 02-20-2016, 09:13 AM
  #6  
dragoonkane
Registered User
Thread Starter
 
dragoonkane's Avatar
 
Join Date: Feb 2016
Location: Tucson
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default checked under the car

Originally Posted by RWDBajan
Does the spring on that corner still have the plastic insulator at the bottom, between it and the strut?
I was able to get under the car last night and yea the plastic insulator that loops around the bottom of the spring was there. That was my guess that maybe something like that was missing but once i jacked the car up i could no longer make the noise, so i lowered it down on top of a board so i could peek my head under the car and couldnt get the noise then either.
Old 02-20-2016, 09:17 AM
  #7  
dragoonkane
Registered User
Thread Starter
 
dragoonkane's Avatar
 
Join Date: Feb 2016
Location: Tucson
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default bolts seem tight

Originally Posted by jtbinvalrico
Check the bolts securing top of the strut on the passenger side......check the bolts securing that strut bar too.
the sound seems lower then that when standing next to the car it was my first thought too that the bolts weren't tight on top
Old 02-22-2016, 03:06 PM
  #8  
RWDBajan
Registered User
 
RWDBajan's Avatar
 
Join Date: Aug 2015
Location: Barbados
Posts: 180
Received 18 Likes on 18 Posts
Default

You could try spraying the various potential squeak points with silicone one at a time. Carefully so you don't get any on the brakes or tires. Red circled areas, I'm thinking.
Attached Thumbnails Squeaking sound after repairs-fsu.png  
Old 03-03-2016, 08:18 PM
  #9  
dragoonkane
Registered User
Thread Starter
 
dragoonkane's Avatar
 
Join Date: Feb 2016
Location: Tucson
Posts: 10
Likes: 0
Received 0 Likes on 0 Posts
Default problem fixed

So just to recap and to help anyone that has this issue. it turns out that the shop damaged the strut mount and messed up the rubber insulator and there was metal on metal inside the strut mount. So i replaced the mounts and no more squeak

thx for all the help
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
phelannz
Maintenance & Repair
6
02-26-2016 08:27 AM
J_Nunez33
Maintenance & Repair
6
02-19-2016 01:17 PM
shadowm891
Engine & Drivetrain
1
02-16-2016 12:13 PM
zachary.newsom
Audio, Video & Electronics (DIY)
1
02-15-2016 04:14 PM
Dustin350
Maintenance & Repair
0
02-13-2016 07:55 PM



Quick Reply: Squeaking sound after repairs



All times are GMT -8. The time now is 04:25 PM.