Injected Performance brings you HALTECH PLATINUM PNP STANDALONE
#602
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Updated instructions for wideband wiring to include the new harnesses with wideband breakout connectors:
Haltech Wideband Wiring Information
Haltech Wideband Wiring Information
#606
#608
Registered User
iTrader: (1)
Join Date: Aug 2009
Location: Norway
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Are there plans on a 1.05 firmware for the 350 PnP?
And one question on the 1.04 I run both firmware and software of this version and cant get the over run fuel cut to activate, would this work with the 1.05 software? I have the Decel cut RPM on 1400Rpm over 50deg, celsius but it wont cut fuel.
And one question on the 1.04 I run both firmware and software of this version and cant get the over run fuel cut to activate, would this work with the 1.05 software? I have the Decel cut RPM on 1400Rpm over 50deg, celsius but it wont cut fuel.
#609
![Default](https://my350z.com/forum/images/icons/icon1.gif)
By over run fuel cut are you saying rev limiter is not working for you? If so email me so we can find out what is going on with yours - that is the first I have heard of that.
1.06 will be the next release, and is nearing completion. It has some exciting new things
1.06 will be the next release, and is nearing completion. It has some exciting new things
![Smilie](https://my350z.com/forum/images/smilies/smile.gif)
Are there plans on a 1.05 firmware for the 350 PnP?
And one question on the 1.04 I run both firmware and software of this version and cant get the over run fuel cut to activate, would this work with the 1.05 software? I have the Decel cut RPM on 1400Rpm over 50deg, celsius but it wont cut fuel.
And one question on the 1.04 I run both firmware and software of this version and cant get the over run fuel cut to activate, would this work with the 1.05 software? I have the Decel cut RPM on 1400Rpm over 50deg, celsius but it wont cut fuel.
#611
Registered User
iTrader: (1)
Join Date: Aug 2009
Location: Norway
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
Sounds good, I am sending you a PM, it`s not the rev limiter but the fuel cut when you let go of the pedal and let the engine "brake", a bit hard to explain when english is not my first language..
#616
New Member
iTrader: (18)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
No official ETA, but there is hope that at SEMA Haltech will disclose a add-on module for the 350Z unit to allow multiple additional inputs/outputs (to work with W/M injection, failsafes, shift lights, etc). Of course, we need the firmware to support the hardware and provide functionality for additional maps, triggers, etc, to properly take advantage of it. That update will hopefully come not long after v1.06.
#617
Registered User
iTrader: (11)
Join Date: May 2005
Location: New Jersey
Posts: 1,301
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://my350z.com/forum/images/icons/icon1.gif)
No official ETA, but there is hope that at SEMA Haltech will disclose a add-on module for the 350Z unit to allow multiple additional inputs/outputs (to work with W/M injection, failsafes, shift lights, etc). Of course, we need the firmware to support the hardware and provide functionality for additional maps, triggers, etc, to properly take advantage of it. That update will hopefully come not long after v1.06.
So does that mean I would be able to remove my Meth controller and just have the Haltec control the meth pump and flow and at what Psi to start spraying like I do now?
#619
New Member
iTrader: (11)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
it is almost guaranteed that there will be no progressive control for meth. just an on and off trigger. But there would be an input that would allow a flow meter or empty tank signal to get back to the haltech to tell it to open the wastegate.
That can be done now using and of the wastegate solenoids though.
That can be done now using and of the wastegate solenoids though.
#620
New Member
iTrader: (18)
![Default](https://my350z.com/forum/images/icons/icon1.gif)
They might give another PWM channel (like that used for the boost control solenoid) or injector drivers. Honestly just a couple inputs and outputs extra are all that are needed (map switching, boost control via external input, failsafe outputs, meth output, maybe extra injector outputs). We'll see what happens...
Last edited by rcdash; 10-30-2009 at 07:33 PM.