Injected Performance brings you HALTECH PLATINUM PNP STANDALONE
#801
New Member
iTrader: (11)
Hal its definitely a firmware issue regarding the misfiring.
I can switch to 1.0 and have no problems. switch to 1.04 or 1.061 and it will misfire like crazy.
Firmware did not fix my aux output on when the key is in the 'ACC' position, so there is still something wrong with my brand new unit that I bought from Forged.
Also, anyone else having their the v1.07 ECU manager crash after it tries to load a map? I had to uninstall and go back to 1.06 for it to be stable.
I can switch to 1.0 and have no problems. switch to 1.04 or 1.061 and it will misfire like crazy.
Firmware did not fix my aux output on when the key is in the 'ACC' position, so there is still something wrong with my brand new unit that I bought from Forged.
Also, anyone else having their the v1.07 ECU manager crash after it tries to load a map? I had to uninstall and go back to 1.06 for it to be stable.
Last edited by str8dum1; 03-21-2010 at 02:01 PM.
#803
New Member
iTrader: (11)
I called and left a message for you on Friday. I'll call again this afternoon
The aux out ground when in the ACC position might be a board problem, but not working with any other firmware besides 1.00 is not.
My car is a 2003, can you confirm tuning a boosted 2003 with the latest firmware with no electrical problems? If so, then of course I will be sending my unit back ASAP.
The aux out ground when in the ACC position might be a board problem, but not working with any other firmware besides 1.00 is not.
My car is a 2003, can you confirm tuning a boosted 2003 with the latest firmware with no electrical problems? If so, then of course I will be sending my unit back ASAP.
#804
New Member
iTrader: (7)
generally tuning with newer software and older firmware should not be an issue. From what I have seen if the DX9c drivers are not installed correctly that are supplied with the software it will crash after it tries to load a map.
Try running DXDIAG on your lappy and maybe re-install the DX9c drivers from the supplied software ie: haltech_ecu_manager_1_07_2_release\Haltech ECU Manager - 1.07.2 Release\App\DirectX 9.0c\dxsetup.exe
Try running DXDIAG on your lappy and maybe re-install the DX9c drivers from the supplied software ie: haltech_ecu_manager_1_07_2_release\Haltech ECU Manager - 1.07.2 Release\App\DirectX 9.0c\dxsetup.exe
#806
New Member
iTrader: (11)
edit: I just check my AUX output with my mulitmeter. Definitely grounds the switch out when the car is in 'ACC' and then ungrounds when the car is in the 'ON' position.
Sending the box back tomorrow qwith fingers crossed for a fast turn around!!!
ya mine worked ok for a while then stopped. I'm going to try reinstalling DX9.
regardless, hopefully I just have a bad box and its really not a firmware incompatibility.
Sending the box back tomorrow qwith fingers crossed for a fast turn around!!!
ya mine worked ok for a while then stopped. I'm going to try reinstalling DX9.
regardless, hopefully I just have a bad box and its really not a firmware incompatibility.
Last edited by str8dum1; 03-22-2010 at 05:16 PM.
#807
Registered User
iTrader: (11)
Join Date: May 2005
Location: New Jersey
Posts: 1,301
Likes: 0
Received 0 Likes
on
0 Posts
Thank you Hal for helping out today over the phone
Found out it was the ECM relay so have to order the whole IPDM
Hopefully that will fix the issue with the missing voltages
Giovanni
Found out it was the ECM relay so have to order the whole IPDM
Hopefully that will fix the issue with the missing voltages
Giovanni
#808
Str8dum1, I'm excited to get your box in and see what is going on. Spoke with Raj briefly today about it as well.
#809
New Member
iTrader: (11)
The box is there, so hopefully you guys have some time to get it straight. Its like XMas day but forgetting the batteries for your new toy and the stores are closed so you cant use it. LOL
On a side note, how many cars do you tune using VE? In the updated manual it has a section about VE tuning and how much easier it is and more adaptive to changing weather conditions etc. Seems like the way to tune, yet most Haltech tuners seems to continue using IPW. any comments?
On a side note, how many cars do you tune using VE? In the updated manual it has a section about VE tuning and how much easier it is and more adaptive to changing weather conditions etc. Seems like the way to tune, yet most Haltech tuners seems to continue using IPW. any comments?
Last edited by str8dum1; 03-25-2010 at 09:28 AM.
#811
To clear up any confusion on current software and firmware:
Software: Current version is 1.07.2 (autosave bug, details below)
Firmware: Current version is 1.06.1 (stable)
The current version of software 1.07.2 is having an autosave problem with some ECUs, including ecus beyond the 350Z line. Symptoms: The software will lock up upon connecting to the ecu. Haltech is aware and working to get the next release of software out asap with that autosave bug fixed. If anyone is having problems with 1.07.2, go back to 1.06.
Software 1.06 is available on our site, www.injectedperformance.com/haltech
Software: Current version is 1.07.2 (autosave bug, details below)
Firmware: Current version is 1.06.1 (stable)
The current version of software 1.07.2 is having an autosave problem with some ECUs, including ecus beyond the 350Z line. Symptoms: The software will lock up upon connecting to the ecu. Haltech is aware and working to get the next release of software out asap with that autosave bug fixed. If anyone is having problems with 1.07.2, go back to 1.06.
Software 1.06 is available on our site, www.injectedperformance.com/haltech
#813
Registered User
iTrader: (19)
Join Date: Feb 2005
Location: Indianapolis
Posts: 963
Likes: 0
Received 0 Likes
on
0 Posts
None of the gauges work on my 1.07. I try to put a number gauge for AFR and it doesnt ever move. Nor does RPM or anything else for that mattter. Time to downgrade firmware i guess
#817
ECU Manager 1.07.4 now available (replaced 1.07.2). Change log at link below, no major 350Z updates.
http://injectedperformance.com/haltech/
Current software and firmware:
Software: Current version is 1.07.4
Firmware: Current version is 1.06.1
http://injectedperformance.com/haltech/
Current software and firmware:
Software: Current version is 1.07.4
Firmware: Current version is 1.06.1
#819
I got the engine rigged in the motor dyno after som work... Now the 1.074 software don't display any gauges despite the ECU is online. Instead I only got a page for customize the layout. What is wrong? we need to start tuning ASAP