ppat1989

iTrader: (5)

Good lord. What would those even go on? They look like tires for the newest batmobile.

travlee

iTrader: (8)

i bet they would go on those huge land movers you see in quarries.

on a side note, it is too cool how they make snow....

http://www.bearmountain.com/snowboar.../New-Image.jpg

Lucky736

Random question but anyone know anyone into Dodge Magnums that may frequent their forums? There is a gentleman who owes me a decent chunk of money, lives in Dallas still, who frequents them apparently now and I would like to put the word out of what he did. Never paying for a car. Just kind of a heads up type thing.

mikes10

that is cool Travis - wild they can make snow enough so people can ski - over such a large area -

travlee

iTrader: (8)

yeah, from what i have read they have made 18 inches of it

fithamoto

iTrader: (24)

Bummer Lucky, I hope you get your money from him.

Sucks that people would runaway from their responsibilities and leave others to endure the loss.


Travis....those things are loud as Shiet also ! Like a Jet engines.

travlee

iTrader: (8)

why the hell did i volunteer to work today.... i have had 20+ calls holding all freaking day....

fithamoto

iTrader: (24)

This is a pretty awesome vid from red Bull.

http://www.youtube.com/watch?v=M0jmS...ature=youtu.be

3hree5ive0ero

iTrader: (95)

^ That was epic!

Lucky736

Any input here from anyone on this:

https://my350z.com/forum/brakes-and-...ml#post9947021

Seems to be the way things are going lately, needing a few more yes' and a few lesl no's on just about everything. Lol.

steidz

iTrader: (8)

So from the other post I am guessing this is on your rear.

I would jack up both sides of the car take off the wheel and start the car, put it in gear and let the hub spin. That will let you take a good look and hopefully pin point the problem.

You shouldn't have a grinding sound driving around, and if it is in your brakes, it should change when the brakes are applied.

Any chance its the bearing grinding and not the brakes?

Good luck

Lucky736

A buddy told me to leave the car up and wiggle the wheel. No play in it. He said it's an easy way to check the bearing. I also thought it was odd the noise changed when applying the brakes. Ug.

Replaced the slides tonight, took it all apart again, since one of the bolts was starting to get rounded and didn't want to have an issue later. Going to warm them up and see if that helps at all. Also checked the shield to see if maybe it bent at all. Just checked the edges and was equal all around the rotor.

steidz

iTrader: (8)

I would think the sound would change a lot if it was just a pad hanging or dragging when you apply the brakes.

I don't think you'll notice anything about the bearing by just wigging the wheel. They can feel tight and still have a bearing go bad. At least that is my front wheel bearing experience.

Lucky736

Goes from a sort of lighter dragging, intermittent noise almost to like a solid dragging sound. Very odd. Parking brake seems okay, thought at first maybe it was sticking but I doubt it. Piston compresses, again, so I don't THINK it is an issue with that.

Just very odd.

steidz

iTrader: (8)

One other thing you could check is the the temperature of the brake assembly after driving. If a pad or emergency brake is dragging you'll have a lot more heat compared to the other side.

Lucky736

I know something is up as the other day I did smell something coming from that corner. It has yet to come back at this point.

fithamoto

iTrader: (24)

When I adjusted my E-brake and the shoe wasn't seated right...it heated the heck out of the rotor hub....so I would drive around for a few minutes and then do what Steidz says and measure the temp.

Mine was hotter than coal !

mikes10

cool vid me and the kiddo's liked it - thanks for sharing -

its rear end? diff? - i have no idea if this car has a carrier bearing but that would be another thought -

pic of the day

fithamoto

iTrader: (24)

Umm.....Note to Mike.....invest in flash for camera ! Lol

AndyBGAWTSuhZ

iTrader: (15)

Interesting read for those with the DE

https://my350z.com/forum/intake-exha...-anyone-8.html