350z UTEC comments from TurboXS
#141
Sponsor
Forged Performance
Forged Performance
iTrader: (92)
Originally Posted by BlackTuner
Well what I am pushing for is a complete revamp of the way the speed density tuning currently works. I'd like to see more of an AFR Target Map and a VE table correction map. This is similar to the way the current WRX software works. With the added AFR Target map and VE correction table we gain the use of the IIRC 32x32 background AFR map it could actually be more but this is what works well. With this map set correctly you gain resolution but also it becomes much easier to tune, in the VE correction map. I also will be getting the launch control, flat shift etc. back into the software suite.
As we get closer I will let you know.
Thanks,
Jermaine~
As we get closer I will let you know.
Thanks,
Jermaine~
#142
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: East Coast
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Kenk2
Thank you for the prompt reply..
FWIW, I would be willing to PAY for this update.. The sooner we can get our hands on it the better..
FWIW, I would be willing to PAY for this update.. The sooner we can get our hands on it the better..
Software has always been free. I'd probably be lynched in public if we did charge you.
#144
Professional
iTrader: (7)
Join Date: Jan 2004
Location: Home
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackTuner
OO really... How about 1 million dollars?
Software has always been free. I'd probably be lynched in public if we did charge you.
Software has always been free. I'd probably be lynched in public if we did charge you.
IMO, I wouldnt mind paying for an upgrade..
#145
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: East Coast
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dave 90TT
Yeah, the upgrade would be nice, what I really want is something to fix the P1444 code for high altitude VQ35's, and also better support for Rev-Ups.
Dave
Dave
Rev-up support? If you mean cam phasing control. I can tell you that with certainty the current UTEC does not have the ability to control the exhaust cam. While we do have the hardware that could control the intake cam, I think the resources are better spent on updated engine running code.
Originally Posted by kenk
LOL.. I really dont mind and beta testing would be kinda cool......
IMO, I wouldnt mind paying for an upgrade..
IMO, I wouldnt mind paying for an upgrade..
Thanks,
Jermaine~
#146
Professional
iTrader: (7)
Join Date: Jan 2004
Location: Home
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackTuner
We typically don't beta test software because of the huge leak potential.
Thanks,
Jermaine~
Thanks,
Jermaine~
I totally understand.. I was in the software biz a few years back and had that problem.. We spent more on R & D to be able to lock down the software to each cpu it was ridiculous.. They finally started to 'clone' laptops and make each one look the same and sold the laptop with software installed as a complete package
Anyways.. No worries about leaking here...
#147
350Z 2+2
iTrader: (4)
Join Date: Jan 2004
Location: Omaha, NE
Posts: 1,890
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackTuner
Dave, I am not at altitude so it would be nearly impossible for me to fix it. If you are willing, try to wire the evap system directly to the factory ecu instead of through the utec. I'd work with you on figuring out what needs to be done exactly.
Rev-up support? If you mean cam phasing control. I can tell you that with certainty the current UTEC does not have the ability to control the exhaust cam. While we do have the hardware that could control the intake cam, I think the resources are better spent on updated engine running code.
Like I said, though, nothing that would make me not want to get a UTEC.
Dave
#148
Registered User
Thread Starter
iTrader: (2)
Join Date: Jul 2004
Location: East Coast
Posts: 362
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dave 90TT
Email sent. Like I said, there are a number of people here in Colorado that are more than highly interested in this.
What I have found (and heard from others, as well), is that there is some hesitation/slight power loss at about 2700-3200 RPMS with Rev-Up motors and the UTEC. Nothing to kill the deal, but enough so that you notice it. For all I know, it might be totally unrelated to the the Rev-Ups, or it might have more to do with the MAP sensing. Regardless, you can almost tune it out, but it creeps back in after the tune.
Like I said, though, nothing that would make me not want to get a UTEC.
Dave
What I have found (and heard from others, as well), is that there is some hesitation/slight power loss at about 2700-3200 RPMS with Rev-Up motors and the UTEC. Nothing to kill the deal, but enough so that you notice it. For all I know, it might be totally unrelated to the the Rev-Ups, or it might have more to do with the MAP sensing. Regardless, you can almost tune it out, but it creeps back in after the tune.
Like I said, though, nothing that would make me not want to get a UTEC.
Dave
Slight hesitation? Sounds like tuning to me. I have a local customers who have never complained of such a things. This is the perfect forum to seek help for such an issue. IF you or any one has datalogs of the issue feel free to post them.
Thanks,
Jermaine~
#151
Registered User
iTrader: (5)
Hey, just wanted to backup what Dave has said. I get the power blip and its only there at certain times not always. Also im forever living with the P1444 code. Im praying to get rid of that code, thats the only thing being thrown and it seems as Dave has said to be an altitude related thing. I love my utec and i wouldnt not have it but these are two things id really like to try and get resolved and would be willing to work with you to find ways around them. Our shop is looking for someone to help with this as well as they have a large number of customers facing the same issues.
#152
Professional
iTrader: (7)
Join Date: Jan 2004
Location: Home
Posts: 1,211
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by myspivey
Hey, just wanted to backup what Dave has said. I get the power blip and its only there at certain times not always. Also im forever living with the P1444 code. Im praying to get rid of that code, thats the only thing being thrown and it seems as Dave has said to be an altitude related thing. I love my utec and i wouldnt not have it but these are two things id really like to try and get resolved and would be willing to work with you to find ways around them. Our shop is looking for someone to help with this as well as they have a large number of customers facing the same issues.
#154
New Member
iTrader: (3)
Join Date: Jan 2006
Location: Brownsville, Texas
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
i'm still having a hesitation problem around 6200-6500 rpm. I've done the grounding fix and still having the problem. I also have a hesitation after every time i shift. SGP says that it is the way i shift but i can granny shift it and it still does it sometimes. Anyone have any suggestions.
#156
Registered User
iTrader: (2)
Join Date: Jun 2005
Location: Birmingham, Alabama
Posts: 244
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlackTuner
Rev-up support? If you mean cam phasing control. I can tell you that with certainty the current UTEC does not have the ability to control the exhaust cam. While we do have the hardware that could control the intake cam, I think the resources are better spent on updated engine running code.