Uprev wants suggestions.
#241
Banned
Thread Starter
iTrader: (5)
Join Date: Nov 2005
Location: Austin TX
Posts: 1,095
Likes: 0
Received 0 Likes
on
0 Posts
i looked through this but didn't find it.
Is there ANYWAY we can get wideband support on the 03-04 ecu's? I'm kind of sick of having to log in my innovate software AND cipher at the same time and then when i tune i have to go back and forth since they don't interface.
Can we at least add the newer OEM widebands into our downpipes and somehow get a signal from it? I would be willing to add even the OEM ones onto the car if i could get it to wire into the ecu somehow.
Is there ANYWAY we can get wideband support on the 03-04 ecu's? I'm kind of sick of having to log in my innovate software AND cipher at the same time and then when i tune i have to go back and forth since they don't interface.
Can we at least add the newer OEM widebands into our downpipes and somehow get a signal from it? I would be willing to add even the OEM ones onto the car if i could get it to wire into the ecu somehow.
We're working on integrating third party Wideband data loggers with Cipher. When that will be available is unknown, but after talking to all the companies at SEMA, they are all on board with the idea and almost all of them have sent Development kits. So it's really just a matter of time.
#242
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
We're working on integrating third party Wideband data loggers with Cipher. When that will be available is unknown, but after talking to all the companies at SEMA, they are all on board with the idea and almost all of them have sent Development kits. So it's really just a matter of time.
I was finishing up some wiring on sensors tonight and this same idea hit me because I was thinking of how much of a pain it is going to be to compare 2 sets of data for my tuning.
Since cipher can't log the wideband, could the program at least merge with my other data logging program. I use the logworks so it would be finding a way to convert logworks data to cipher data or vice versa. That would be very nice. Have cipher and logworks both open but the cipher data pushed into the logworks and recorded as one file.
Thanks for the update. I'll keep my eye out for news on this.
#244
Registered User
iTrader: (12)
Join Date: Aug 2007
Location: Ann Arbor, MI
Posts: 1,972
Likes: 0
Received 0 Likes
on
0 Posts
Hello Uprev, I was wondering if your turn around time for the e-tunes was still 2 weeks? It seems like they're taking longer than 2 weeks for many people.
Can you please confirm this.
Also what's the main difference between an e-tune from you directly vs one of your pro-tuners? Does your pro-tuners use the same data from past vehicles that you guys use or do they have their own developed?
Thanks (Tried emailing you guys but got no response)
Can you please confirm this.
Also what's the main difference between an e-tune from you directly vs one of your pro-tuners? Does your pro-tuners use the same data from past vehicles that you guys use or do they have their own developed?
Thanks (Tried emailing you guys but got no response)
#246
Cipher only question/suggestion.
Looked many times at the long list of parameters you can data log. I see oil 'temp', but can't find oil 'pressure' or am I blind as a bat. G35's don't have oil pressure gauge like the 350Z's, only an idiot light. Wish to data log oil pressure with my other parameters selected.
Thanks.
Looked many times at the long list of parameters you can data log. I see oil 'temp', but can't find oil 'pressure' or am I blind as a bat. G35's don't have oil pressure gauge like the 350Z's, only an idiot light. Wish to data log oil pressure with my other parameters selected.
Thanks.
#247
Vendor - Former Vendor
iTrader: (7)
With the map switching through the Cruise control there is a way to set it up for luanch control as well as the ability to pull timing and add fuel for antilag...
Uprev can only datalog the parameters that pass through each models ecu, so on your G35 it isnt set up to measure oil pressure through the ECU you wont be able to monitor it, like ya can with the 350z's...
Cipher only question/suggestion.
Looked many times at the long list of parameters you can data log. I see oil 'temp', but can't find oil 'pressure' or am I blind as a bat. G35's don't have oil pressure gauge like the 350Z's, only an idiot light. Wish to data log oil pressure with my other parameters selected.
Thanks.
Looked many times at the long list of parameters you can data log. I see oil 'temp', but can't find oil 'pressure' or am I blind as a bat. G35's don't have oil pressure gauge like the 350Z's, only an idiot light. Wish to data log oil pressure with my other parameters selected.
Thanks.
#248
So you're saying Cipher shows oil pressure as a selectable parameter with your Z's ECU after you connect? Thanks.
#249
New Member
iTrader: (8)
Join Date: Jan 2007
Location: terre haute, IN; STL, MO
Posts: 6,457
Likes: 0
Received 7 Likes
on
6 Posts
us g35's have an oil pressure switch, they have a "sensor". I used a stock 350z sensor in place of my oem one but you can't log through the ecu. I only used it to log from my separate logworks datalogger.
#250
Oh well, thought I was on to something as a feasible suggestion.
#253
Registered User
iTrader: (12)
Also see the UpRev ROM Support Matrix
C
Last edited by cdoxp800; 02-25-2010 at 03:54 PM.
#257
New Member
iTrader: (23)
Another vote for the external map veiwing device!
And of course control over the auto trans paramaters.
TCS to stay off when pressed, not having to press it every time the car is restarted.
I know someone also offers this as a memory module, maybe he can create the map viewing device instaed of having to watch and count the blinks for cruise.
And of course control over the auto trans paramaters.
TCS to stay off when pressed, not having to press it every time the car is restarted.
I know someone also offers this as a memory module, maybe he can create the map viewing device instaed of having to watch and count the blinks for cruise.
#258
Registered User
iTrader: (3)
Join Date: Apr 2008
Location: Orlando
Posts: 770
Likes: 0
Received 0 Likes
on
0 Posts
Yes, it works with the HR. GTM uses it on all the turn key TT kits.
Also see the UpRev ROM Support Matrix
C
Also see the UpRev ROM Support Matrix
C