Notices
Wheels & Tires 350Z Rollers and Rubbers

Official Aggressive Wheels & Fat Tires Thread

Thread Tools
 
Search this Thread
 
Old 03-23-2012, 08:20 PM
  #3401  
SoCal07HR
Registered User
iTrader: (17)
 
SoCal07HR's Avatar
 
Join Date: Apr 2011
Location: Socal
Posts: 824
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by maximariceboi
Need some help picking tires for new set up.

Currently running:
19x9.5 +22 255/35
19x10.5+22 285/35
Lowered with Greddy coilovers less than a finger gap in the rear with a minor fender roll, spl rear camber arms, spc toe bolts, spl toe arms and spc front camber arms.

My new set up will be:
19x9.5+22
19x11+15

What tires should I run next? I plan to stick with 255/35 front or go wider?. Will 285/35 be safe to run in the rear or will need some more negative camber or roll the fender more? At the moment I found out there is some bondo on 1 quarter panel but I do plan to get body work done soon but need to take care of a few other things... Can I go larger tires without out rolling the fender more? More negative camber?

Any help would be appreciated. Thanks in advance!

Eric
You could go 275/30 and 295/30 without any problems. I'm running a 18x11 +30 with 295/35 in the rear and I have lots of room I know I could get a 15mm spacer in easy. Your front wheel is very common and I've seen 275/30's on the same offset. Since you have all adjustable suspension you shouldnt have anything to worry about.
Old 03-23-2012, 09:05 PM
  #3402  
maximariceboi
Registered User
iTrader: (52)
 
maximariceboi's Avatar
 
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by SoCal07HR
You could go 275/30 and 295/30 without any problems. I'm running a 18x11 +30 with 295/35 in the rear and I have lots of room I know I could get a 15mm spacer in easy. Your front wheel is very common and I've seen 275/30's on the same offset. Since you have all adjustable suspension you shouldnt have anything to worry about.
Ah ok so fender roll isn't really necessary for the rear? Right now my current set up, it's pretty flush and it might seem the new wheels are going to poke a bit at its current stance. I don't remember the where the rear camber is set.. I will need to find my paper work to confirm. Thanks for the advice and will look into the 295 rears now should I be leaving the vdc off since the diameter will be off?
Old 03-23-2012, 09:10 PM
  #3403  
SoCal07HR
Registered User
iTrader: (17)
 
SoCal07HR's Avatar
 
Join Date: Apr 2011
Location: Socal
Posts: 824
Likes: 0
Received 0 Likes on 0 Posts
Default

You might need to roll them a bit more or run a little more camber. VDC should be good, I don't have VDC though so I'm not really an expert on that. I'm sure someone will chime in on that.
Old 03-24-2012, 04:30 AM
  #3404  
rps13drift
Registered User
iTrader: (3)
 
rps13drift's Avatar
 
Join Date: Jan 2008
Location: north NJ
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts
Default

18x10.5 +22 / 275/35/18 - all around
Name:  2e5f9b6f-1.jpg
Views: 562
Size:  50.2 KB
Name:  e2373e54.jpg
Views: 562
Size:  39.6 KB

Last edited by rps13drift; 03-24-2012 at 04:35 AM.
Old 03-24-2012, 08:34 AM
  #3405  
maximariceboi
Registered User
iTrader: (52)
 
maximariceboi's Avatar
 
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by SoCal07HR
You might need to roll them a bit more or run a little more camber. VDC should be good, I don't have VDC though so I'm not really an expert on that. I'm sure someone will chime in on that.
Ok thanks for te help!

Anyone with vdc running 295/30/19 rears?
Old 03-24-2012, 09:45 AM
  #3406  
Kulwiec
New Member
iTrader: (2)
 
Kulwiec's Avatar
 
Join Date: Jan 2011
Location: 1
Posts: 301
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by fhumphrey04
Thanks guys!

The rear doesn't look as aggressive because it isn't as low as the front, but it is. Regarding the rear bumper- it's definitely wild and quite a controversial piece on here. Some days I think about changing it for an OEM + TS diffuser, but this is a Nismo and the rear bumper is a signature piece.
Not trying to poop on the wheel thread, but if you were to go that route, voltex diffuser is sick and you could pull it off with nismo front/sides


Picture from previous owner, same wheels/ no bodykit now.

Name:  2840958360_ddce9ffce1_b.jpg
Views: 626
Size:  119.8 KB

Photo by Myacreative.com
Old 03-24-2012, 10:49 AM
  #3407  
terrasmak
Super Moderator
MY350Z.COM
iTrader: (8)
 
terrasmak's Avatar
 
Join Date: Jan 2007
Location: Sin City
Posts: 28,707
Received 2,307 Likes on 1,662 Posts
Default

Originally Posted by maximariceboi
Ok thanks for te help!

Anyone with vdc running 295/30/19 rears?
265/30 or 275/30 front and you will have ZERO issues.
Old 03-24-2012, 11:15 AM
  #3408  
-Trav-
New Member
iTrader: (37)
 
-Trav-'s Avatar
 
Join Date: Aug 2010
Location: Mountain View, CA
Posts: 1,448
Likes: 0
Received 2 Likes on 1 Post
Default

Originally Posted by maximariceboi
Ok thanks for te help!

Anyone with vdc running 295/30/19 rears?
Had 295/30 with 265/30 front, no problems.

I like 275 though. 265 is small on a 9.5, IMO

Last edited by -Trav-; 03-24-2012 at 04:27 PM.
Old 03-24-2012, 01:26 PM
  #3409  
maximariceboi
Registered User
iTrader: (52)
 
maximariceboi's Avatar
 
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by terrasmak
265/30 or 275/30 front and you will have ZERO issues.
Ok cool I'll look into the 265/30 for the fronts. Thanks!

Originally Posted by -Trav-
Had 295/30 with 265/30 front, no problems.

I like 265 is small on a 9.5 though, IMO
Thanks for the reply! What size wheels were you running on the rears and did you have to roll the fender?

Also I would like to know what kind of tires are you guys are using. I'm planning to pick up bfgoodridge kdw2 tires. Any other suggestions? Thanks!
Old 03-24-2012, 04:34 PM
  #3410  
-Trav-
New Member
iTrader: (37)
 
-Trav-'s Avatar
 
Join Date: Aug 2010
Location: Mountain View, CA
Posts: 1,448
Likes: 0
Received 2 Likes on 1 Post
Default

10.5 +22 rear and I had rolled the rear previously, but not necessarily because of that setup, so Im not sure if its absolutely required. I had no issues with mine. Rear tire was pirelli Pzero which fit PERFECT, no bluge just a square fit. Brands make a huge difference if youre picky.

Front was falken whech blew...to skinny and stretched in comparison.

I had the kdw2 on stock wheels and loved them. Excellent grip in wet or dry. Only downside was the noise, nearly deafening when coming to a stop. Some say its alignment but mine was good, others would agree theyre freakin loud. Tire rack has em worst in noise rating... I havent looked recently but I didnt know they made 30 profile KDWs?
Old 03-24-2012, 06:49 PM
  #3411  
maximariceboi
Registered User
iTrader: (52)
 
maximariceboi's Avatar
 
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by -Trav-
10.5 +22 rear and I had rolled the rear previously, but not necessarily because of that setup, so Im not sure if its absolutely required. I had no issues with mine. Rear tire was pirelli Pzero which fit PERFECT, no bluge just a square fit. Brands make a huge difference if youre picky.

Front was falken whech blew...to skinny and stretched in comparison.

I had the kdw2 on stock wheels and loved them. Excellent grip in wet or dry. Only downside was the noise, nearly deafening when coming to a stop. Some say its alignment but mine was good, others would agree theyre freakin loud. Tire rack has em worst in noise rating... I havent looked recently but I didnt know they made 30 profile KDWs?
Ah ok yea I had to roll a bit on my fenders but 1 side I have some bondo on there so I couldn't roll too much. I guess I'll just roll it more till I get body work done. Wow didn't think kdw are that noisy... What other tire would you suggest? I have hankook v12 Evo and hate them
Old 03-25-2012, 08:53 PM
  #3412  
G4nismo
Registered User
iTrader: (8)
 
G4nismo's Avatar
 
Join Date: Jun 2009
Location: NC
Posts: 1,669
Received 10 Likes on 9 Posts
Default

245/35
275/35
Name:  A-8.jpg
Views: 553
Size:  67.6 KB
Old 03-25-2012, 08:58 PM
  #3413  
805350z
Registered User
iTrader: (7)
 
805350z's Avatar
 
Join Date: Jul 2011
Location: Moorpark, CA
Posts: 1,600
Likes: 0
Received 0 Likes on 0 Posts
Default

^
Name:  96170137.jpg
Views: 563
Size:  121.3 KB
Old 03-25-2012, 10:06 PM
  #3414  
maximariceboi
Registered User
iTrader: (52)
 
maximariceboi's Avatar
 
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by maximariceboi
Ah ok yea I had to roll a bit on my fenders but 1 side I have some bondo on there so I couldn't roll too much. I guess I'll just roll it more till I get body work done. Wow didn't think kdw are that noisy... What other tire would you suggest? I have hankook v12 Evo and hate them
How's 265/35/19 for the front? It's slightly larger overall diameter than stock.. The 265/30 is a smaller tire diameter wise. Anyone running 265/35? I know this should clear with out an issue but I want to see of anyone is running those. Not a lot of selection of tires though.

Just looking at tire selection for 265/35/19, 285/35/19:
-Bridgestone potenza s-04 pole position (280 tread)
-Bridgestone potenza re-11 (180 tread)
-continental extreme contact dw (340 tread)
-Yokohama advan sport (180 tread)

Also 265/35/19, 295/30/19
-Bridgestone potenza s-04 pole position

Anyone experienced the Bridgestone potenza s-04 pole position or continental extreme contact dw? Thanks!

Last edited by maximariceboi; 03-25-2012 at 10:47 PM.
Old 03-26-2012, 01:07 AM
  #3415  
-Trav-
New Member
iTrader: (37)
 
-Trav-'s Avatar
 
Join Date: Aug 2010
Location: Mountain View, CA
Posts: 1,448
Likes: 0
Received 2 Likes on 1 Post
Default

If you run 295/30 rear then it would be best to keep the front at a 265 or 275/30. 265/35 would be too tall and might throw off your traction control, if you have it. If you want the 265/35, go with 285/35 rear.
Old 03-26-2012, 03:32 AM
  #3416  
maximariceboi
Registered User
iTrader: (52)
 
maximariceboi's Avatar
 
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by -Trav-
If you run 295/30 rear then it would be best to keep the front at a 265 or 275/30. 265/35 would be too tall and might throw off your traction control, if you have it. If you want the 265/35, go with 285/35 rear.
Just looking at 1010tires.com's tire calculator, 265/35 is 1.26% larger in diameter compared to stock. stock diameter 25.97" 265/35 is 26.3"
265/30 is 2.78% smaller than stock with overall diameter of 25.25".
295/30 is 2.7% , 25.96" diameter, smaller than stock rears 245/45/18 overall diameter of 26.68"

So you are saying if you run smaller rear diameter tire, stay smaller front diameter in the front as well so the traction control won't kick in?
Old 03-26-2012, 04:30 AM
  #3417  
-Trav-
New Member
iTrader: (37)
 
-Trav-'s Avatar
 
Join Date: Aug 2010
Location: Mountain View, CA
Posts: 1,448
Likes: 0
Received 2 Likes on 1 Post
Default

Originally Posted by maximariceboi
So you are saying if you run smaller rear diameter tire, stay smaller front diameter in the front as well so the traction control won't kick in?

bingo
Old 03-26-2012, 05:02 AM
  #3418  
maximariceboi
Registered User
iTrader: (52)
 
maximariceboi's Avatar
 
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by -Trav-
bingo
sweet. thanks for the help! now time to pick up some tires....I'm going to go with 265/35/19, 285/35/19. I hope the 285/35 will be ok for the 19x11 wheels.

Out of these 4...what would you recommend? I would like something with more tread life and have better traction than the hankook v12 evo. Only the 1st 2 offers >280 tread.

-Bridgestone potenza s-04 pole position (280 tread)**
-continental extreme contact dw (340 tread) **
-Bridgestone potenza re-11 (180 tread)
-Yokohama advan sport (180 tread)

thanks again!

Last edited by maximariceboi; 03-26-2012 at 05:32 AM.
Old 03-26-2012, 05:53 AM
  #3419  
Robert_K
Didn't Go Cheap
iTrader: (25)
 
Robert_K's Avatar
 
Join Date: Oct 2005
Location: Spring, TX
Posts: 12,390
Received 101 Likes on 75 Posts
Default

Originally Posted by maximariceboi
sweet. thanks for the help! now time to pick up some tires....I'm going to go with 265/35/19, 285/35/19. I hope the 285/35 will be ok for the 19x11 wheels.

Out of these 4...what would you recommend? I would like something with more tread life and have better traction than the hankook v12 evo. Only the 1st 2 offers >280 tread.

-Bridgestone potenza s-04 pole position (280 tread)**
-continental extreme contact dw (340 tread) **
-Bridgestone potenza re-11 (180 tread)
-Yokohama advan sport (180 tread)

thanks again!
I'm currently running BFG KDW 285/35-19 on my 11's.
Attached Thumbnails Official Aggressive Wheels & Fat Tires Thread-dsc_00146.jpg   Official Aggressive Wheels & Fat Tires Thread-dsc00548.jpg   Official Aggressive Wheels & Fat Tires Thread-dsc00541.jpg  
Old 03-26-2012, 06:52 AM
  #3420  
maximariceboi
Registered User
iTrader: (52)
 
maximariceboi's Avatar
 
Join Date: Mar 2007
Location: NJ/NY
Posts: 913
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Robert_K
I'm currently running BFG KDW 285/35-19 on my 11's.
Nice! whats the offset on your rears? what wheel/tire size are you running on the front? How you like the BTG kdw?


Quick Reply: Official Aggressive Wheels & Fat Tires Thread



All times are GMT -8. The time now is 06:31 AM.