nismo_ninja

if i wanted to run 275/35's on some rpf1 18x10.5" +15 wheels on all four corners what do i need to do? i have the spl v3 front arms and the rear camber arms i will soon be getting the midlinks for the rear to finish it. my car is on cusco zero2's im thinking rt615's for tires would i need spacers and/or roll my fenders? both? any and all help is appreciated

davidv

iTrader: (2)

Rear will be OK. Front is going to be tight.

AdvanZ33

iTrader: (105)

Stock suspension with your desired set-up; for reference:
https://my350z.com/forum/wheels-tire...enis-615s.html

AdvanZ33

iTrader: (105)

Good info here too:
https://my350z.com/forum/wheels-and-...ll-around.html

louie12345

iTrader: (14)

I have 18x9.5 +12 with 265/40 up front and it rubs with 1" drop. I pulled the fender out a little and it still hitting the fender liner screw when I hit a bump. I'm awaiting for my camber arm to show up so I add some negative camber to it. I have 18x9.5 +12 with 285/40 on the back with fender rolled, no issue at all. 275/35 +15 will probably rub up front.

terrasmak

iTrader: (8)

Buy the proper offset wheel?

nismo_ninja

Thanks thats what I needed to know appreciate it

nismonian

iTrader: (11)

a buddy of mine has 18x10.5 +15 rpf1's with 275/35 and 285/35 and it doesnt rub, he's lowered about 1.5 inches but runs -2.5 camber upfront.

nismo_ninja

I don't know what camber ill run yet but as long as I don't need to do too much more than what I've got planned ill be happy, I know you can probably go bigger but I'm trying to keep it somewhat simple and 275 is plenty for autoxing