Nissan 350Z PRO Race car Build
#141
Newbie
Thread Starter
Finishing the body work, made some space for the wheels and room for the coilovers because it was a very tight fit..... and in the process 8.3kg of metal is gone
I wanted to do more cutting on the rear fenders but the fiber glass extensions for the rear are just half on the rear wings and to make other parts it's just not time.....
I wanted to do more cutting on the rear fenders but the fiber glass extensions for the rear are just half on the rear wings and to make other parts it's just not time.....
The following users liked this post:
Dr Hoon (03-02-2023)
#144
Newbie
Thread Starter
Finally after some days of cutting, grinding, welding...loaded the chassi, the fiberglass parts and went to a man who works with composite parts because the parts don't fit 100% and it just doesn't work like this....I know is a race car but it has to be done right
#145
I'm looking forward to the day we start to see more and more of the car instead of less and less
The following users liked this post:
Balea18 (03-07-2023)
#146
Newbie
Thread Starter
Hahaha yes good one !!!!
It's frustrating because this stage is time consuming but has to be done and finished with cutting,welding and grinding because after this the chassi goes straight to paint and if I miss something now.....I will f*** the paint....
It's frustrating because this stage is time consuming but has to be done and finished with cutting,welding and grinding because after this the chassi goes straight to paint and if I miss something now.....I will f*** the paint....
The following users liked this post:
Dr Hoon (03-07-2023)
#148
New Member
it seems the Z33 might be going the way of the E30/E36/E46. The activity may be quiet on this forum but there are lots of solo and team efforts out there doing this.
Will you be campaigning this car in a limited spec or an unlimited weight ratio spec? because with all the work going into this car, I can't imagine a VQ engine in it afterward. and with this amount of chassis mods, it probably won't be suitable as a spec racer. so, unlimited? then put whatever engine you want... like a 3.8 TT?
Will you be campaigning this car in a limited spec or an unlimited weight ratio spec? because with all the work going into this car, I can't imagine a VQ engine in it afterward. and with this amount of chassis mods, it probably won't be suitable as a spec racer. so, unlimited? then put whatever engine you want... like a 3.8 TT?
#149
Newbie
Thread Starter
Yes unlimited but also I can go to endurance racing in GT and GTPro and also hillclimb has an unlimited class.
I have also plans for the future with this car and If I will swap the engine is going to be the VR30DDTT Is light and compact
I have also plans for the future with this car and If I will swap the engine is going to be the VR30DDTT Is light and compact
The following users liked this post:
Aeneas137 (03-09-2023)
#150
New Member
I'm sure that makes more sense than a GTR engine. Z1 has a flywheel for doing a VR30 swap.
The following 3 users liked this post by Balea18:
The following 3 users liked this post by Balea18:
#156
Newbie
Thread Starter
More parts for the car came
Weldable Quick release
Aluminium seat mount because weight reduction
Seat belts 2'' to be able to use the Hans
Carbon helmet because saftey is a priority
Ofcours All FIA approved
Weldable Quick release
Aluminium seat mount because weight reduction
Seat belts 2'' to be able to use the Hans
Carbon helmet because saftey is a priority
Ofcours All FIA approved
#157
Newbie
Thread Starter
The chassi is also finished ,some modifications were needed but now it fits
The guy was able to use the metal sheet from the roof to make a copy from fiberglass
Now that it is finished I send it to paint
The guy was able to use the metal sheet from the roof to make a copy from fiberglass
Now that it is finished I send it to paint
#158
New Member
oh, wow, I was curious about the roof. this car is going to weigh in at like 2700 lb!
not sure if anyone ask this already before but where did you get the fiberglass pieces? I'm interested in just the front fenders.
not sure if anyone ask this already before but where did you get the fiberglass pieces? I'm interested in just the front fenders.
#159
Newbie
Thread Starter
The target is around 2500 lb
The body parts are from Chris in Poland great guy !!! It's a replica from the Amuse 380RS .
This is his web site www.s-tuning.eu
The body parts are from Chris in Poland great guy !!! It's a replica from the Amuse 380RS .
This is his web site www.s-tuning.eu
Last edited by Balea18; 03-19-2023 at 11:59 AM.
The following users liked this post:
Aeneas137 (03-20-2023)
The following 4 users liked this post by Balea18: